DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH PRINT BOOK
 

termios(S)


termios: tcgetattr, tcsetattr, tcsendbreak, tcdrain, tcflush, tcflow, cfgetospeed, cfgetispeed, cfsetispeed, cfsetospeed, tcgetpgrp, tcsetpgrp, tcgetsid -- general terminal interface

Synopsis

#include <termios.h>

int tcgetattr(int fildes, struct termios *termios_p);

int tcsetattr(int fildes, int optional_actions, const struct termios *termios_p);

int tcsendbreak(int fildes, int duration);

int tcdrain(int fildes);

int tcflush(int fildes, int queue_selector);

int tcflow(int fildes, int action);

speed_t cfgetospeed(const struct termios *termios_p);

int cfsetospeed(struct termios *termios_p, speed_t speed);

speed_t cfgetispeed(const struct termios *termios_p);

int cfsetispeed(struct termios *termios_p, speed_t speed);

#include <sys/types.h> #include <termios.h>

pid_t tcgetpgrp(int fildes);

int tcsetpgrp(int fildes, pid_t pgid);

pid_t tcgetsid(int fildes);

Description

These functions describe a general terminal interface for controlling asynchronous communications ports. A more detailed overview of the terminal interface can be found in ioctl(S) interface to termio(HW) that provides the same functionality. However, the function interface described here is the preferred user interface.

Many of the functions described here have a termios_p argument that is a pointer to a termios structure. This structure contains the following members:

   tcflag_t   c_iflag;        /* input modes */
   tcflag_t   c_oflag;        /* output modes */
   tcflag_t   c_cflag;        /* control modes */
   tcflag_t   c_lflag;        /* local modes */
   cc_t       c_cc[NCCS];     /* control chars */

These structure members are described in detail in termio(HW).

Get and set terminal attributes

The tcgetattr function gets the parameters associated with the object referred by fildes and stores them in the termios structure referenced by termios_p. This

function may be invoked from a background process; however, the terminal attributes may be subsequently changed by a foreground process.

The tcsetattr function sets the parameters associated with the terminal (unless support is required from the underlying hardware that is not available) from the termios structure referenced by termios_p as follows:

The symbolic constants for the values of optional_actions are defined in termios.h.

Line control

If the terminal is using asynchronous serial data transmission, the tcsendbreak function causes transmission of a continuous stream of zero-valued bits for a specific duration. If duration is zero, it causes transmission of zero-valued bits for at least 0.25 seconds, and not more than 0.5 seconds. If duration is not zero, it behaves in a way similar to tcdrain.

If the terminal is not using asynchronous serial data transmission, the tcsendbreak function sends data to generate a break condition or returns without taking any action.

The tcdrain function waits until all output written to the object referred to by fildes has been transmitted.

The tcflush function discards data written to the object referred to by fildes but not transmitted, or data received but not read, depending on the value of queue_selector:

The tcflow function suspends transmission or reception of data on the object referred to by fildes, depending on the value of action:

Get and set baud rate

The baud rate functions get and set the values of the input and output baud rates in the termios structure. The effects on the terminal device described below do not become effective until the tcsetattr function is successfully called.

The input and output baud rates are stored in the termios structure. The values shown in the table are supported. The names in this table are defined in termios.h.

Name Description   Name Description
B0 Hang up   B600 600 baud
B50 50 baud   B1200 1200 baud
B75 75 baud   B1800 1800 baud
B110 110 baud   B2400 2400 baud
B134 134.5 baud   B4800 4800 baud
B150 150 baud   B9600 9600 baud
B200 200 baud   B19200 19200 baud
B300 300 baud   B38400 38400 baud

 Name   Description       Name     Description
 B0         Hang up       B600        600 baud
 B50        50 baud       B1200      1200 baud
 B75        75 baud       B1800      1800 baud
 B110      110 baud       B2400      2400 baud
 B134    134.5 baud       B4800      4800 baud
 B150      150 baud       B9600      9600 baud
 B200      200 baud       B19200    19200 baud
 B300      300 baud       B38400    38400 baud

cfgetospeed gets the output baud rate stored in the termios structure pointed to by termios_p.

cfsetospeed sets the output baud rate stored in the termios structure pointed to by termios_p to speed. The zero baud rate, B0, is used to terminate the connection. If B0 is specified, the modem control lines are no longer asserted. Normally, this disconnects the line.

cfgetispeed returns the input baud rate stored in the termios structure pointed to by termios_p.

cfsetispeed sets the input baud rate stored in the termios structure pointed to by termios_p to speed. If the input baud rate is set to zero, the input baud rate is specified by the value of the output baud rate. Both cfsetispeed and cfsetospeed return a value of zero if successful and -1 to indicate an error. Attempts to set unsupported baud rates are ignored. This refers both to changes to baud rates not supported by the hardware, and to changes setting the input and output baud rates to different values if the hardware does not support this.

For speeds higher than 38400 baud, use the functions tcgetspeed(S) and tcsetspeed(S).

Get and set terminal foreground process group ID

tcsetpgrp sets the foreground process group ID of the terminal specified by fildes to pgid. The file associated with fildes must be the controlling terminal of the calling process and the controlling terminal must be currently associated with the session of the calling process. pgid must match a process group ID of a process in the same session as the calling process.

tcgetpgrp returns the foreground process group ID of the terminal specified by fildes. tcgetpgrp is allowed from a process that is a member of a background process group; however, the information may be subsequently changed by a process that is a member of a foreground process group.

If there is no foreground process group, tcgetpgrp returns a value greater than 1 that does not match the process group ID of any existing process group.

Get terminal session ID

tcgetsid returns the session ID of the terminal specified by fildes.

Return values

On success, tcgetpgrp returns the process group ID of the foreground process group associated with the specified terminal. On failure, tcgetpgrp returns -1 and sets errno to identify the error.

On success, tcgetsid returns the session ID associated with the specified terminal. On failure, tcgetsid returns -1 and sets errno to identify the error.

On success, cfgetispeed returns the input baud rate from the termios structure.

On success, cfgetospeed returns the output baud rate from the termios structure.

On success, all other functions return 0. On failure, they return -1 and set errno to identify the error.

Errors

In the following conditions, all of the functions fail and set errno to:

EBADF
The fildes argument is not a valid file descriptor.

ENOTTY
The file associated with fildes is not a terminal.
tcsetattr also fails if the following is true:

EINVAL
The optional_actions argument is not a proper value, or an attempt was made to change an attribute represented in the termios structure to an unsupported value.
tcsendbreak also fails if the following is true:

EINVAL
The device does not support the tcsendbreak function.

tcdrain also fails if one or more of the following is true:


EINTR
A signal interrupted the tcdrain function.

EINVAL
The device does not support the tcdrain function.

tcflush also fails if the following is true:


EINVAL
The device does not support the tcflush function or the queue_selector argument is not a proper value.
tcflow also fails if the following is true:

EINVAL
The device does not support the tcflow function or the action argument is not a proper value.
tcgetpgrp also fails if the following is true:

ENOTTY
the calling process does not have a controlling terminal, or fildes does not refer to the controlling terminal.

EINTR
A signal interrupted the tcgetpgrp function.
tcsetpgrp also fails if the following is true:

EINVAL
pgid is not a valid process group ID.

ENOTTY
the calling process does not have a controlling terminal, or fildes does not refer to the controlling terminal, or the controlling terminal is no longer associated with the session of the calling process.

EPERM
pgid does not match the process group of an existing process in the same session as the calling process.
tcgetsid also fails if the following is true:

EACCES
fildes is a terminal that is not allocated to a session.

ENOTTY
the calling process does not have a controlling terminal, or fildes does not refer to the controlling terminal.

References

setpgid(S), setsid(S), termio(HW)

Notices

Considerations for threads programming

Open file descriptors are a process resource and available to any sibling thread; if used concurrently, actions by one thread can interfere with those of a sibling.

While one thread is blocked, siblings might still be executing.


© 2005 The SCO Group, Inc. All rights reserved.
SCO OpenServer Release 6.0.0 - 01 June 2005