DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH PRINT BOOK
 

libcurl-tutorial(3)





NAME

       libcurl-tutorial - libcurl programming tutorial


Objective

       This  document  attempts  to  describe  the general principles and some
       basic approaches to consider when programming with  libcurl.  The  text
       will  focus  mainly  on  the C interface but might apply fairly well on
       other interfaces as well as  they  usually  follow  the  C  one  pretty
       closely.

       This document will refer to 'the user' as the person writing the source
       code that uses libcurl. That would probably be you or someone  in  your
       position.   What will be generally referred to as 'the program' will be
       the collected source code that you write  that  is  using  libcurl  for
       transfers. The program is outside libcurl and libcurl is outside of the
       program.

       To get the more details on all options and functions described  herein,
       please refer to their respective man pages.


Building

       There  are  many  different ways to build C programs. This chapter will
       assume a unix-style build process. If you use a different build system,
       you  can  still  read this to get general information that may apply to
       your environment as well.

       Compiling the Program
              Your compiler needs  to  know  where  the  libcurl  headers  are
              located.  Therefore you must set your compiler's include path to
              point to the directory where you installed them. The  'curl-con-
              fig'[3] tool can be used to get this information:

              $ curl-config --cflags

       Linking the Program with libcurl
              When  having  compiled the program, you need to link your object
              files to create a single executable. For that  to  succeed,  you
              need to link with libcurl and possibly also with other libraries
              that libcurl itself depends on. Like the OpenSSL libraries,  but
              even  some  standard  OS  libraries may be needed on the command
              line. To figure out which flags to use, once  again  the  'curl-
              config' tool comes to the rescue:

              $ curl-config --libs

       SSL or Not
              libcurl  can  be  built  and customized in many ways. One of the
              things that varies from different libraries and  builds  is  the
              support  for SSL-based transfers, like HTTPS and FTPS. If a sup-
              ported SSL library was detected properly at build-time,  libcurl
              will  be  built  with SSL support. To figure out if an installed
              libcurl has been built with SSL support enabled, use  'curl-con-
              fig' like this:

              $ curl-config --feature

              And  if  SSL  is supported, the keyword 'SSL' will be written to
              stdout, possibly together with a few other features that can  be
              on and off on different libcurls.

              See also the "Features libcurl Provides" further down.

       autoconf macro
              When you write your configure script to detect libcurl and setup
              variables accordingly, we offer a prewritten macro that probably
              does     everything    you    need    in    this    area.    See
              docs/libcurl/libcurl.m4 file - it includes docs on  how  to  use
              it.


Portable Code in a Portable World

       The  people  behind  libcurl  have  put  a  considerable effort to make
       libcurl work on a large amount of different operating systems and envi-
       ronments.

       You program libcurl the same way on all platforms that libcurl runs on.
       There are only very few minor considerations that differs. If you  just
       make  sure to write your code portable enough, you may very well create
       yourself a very portable program. libcurl shouldn't stop you from that.


Global Preparation

       The program must initialize some of the libcurl functionality globally.
       That means it should be done exactly once, no matter how many times you
       intend  to  use  the library. Once for your program's entire life time.
       This is done using

        curl_global_init()

       and it takes one parameter which is a bit pattern  that  tells  libcurl
       what  to  initialize. Using CURL_GLOBAL_ALL will make it initialize all
       known internal sub modules, and might be a  good  default  option.  The
       current two bits that are specified are:

              CURL_GLOBAL_WIN32
                     which  only  does anything on Windows machines. When used
                     on a Windows machine, it'll make libcurl  initialize  the
                     win32 socket stuff. Without having that initialized prop-
                     erly, your  program  cannot  use  sockets  properly.  You
                     should only do this once for each application, so if your
                     program already does this or of another  library  in  use
                     does  it, you should not tell libcurl to do this as well.

              CURL_GLOBAL_SSL
                     which only does anything on libcurls compiled  and  built
                     SSL-enabled.  On  these  systems,  this will make libcurl
                     initialize the SSL library properly for this application.
                     This is only needed to do once for each application so if
                     your program or another library already does  this,  this
                     bit should not be needed.

       libcurl   has   a   default   protection   mechanism  that  detects  if
       curl_global_init(3) hasn't been called by the time curl_easy_perform(3)
       is  called  and  if  that is the case, libcurl runs the function itself
       with a guessed bit pattern. Please note that depending solely  on  this
       is not considered nice nor very good.

       When   the   program   no   longer   uses   libcurl,   it  should  call
       curl_global_cleanup(3), which is the opposite of the init call. It will
       then   do   the  reversed  operations  to  cleanup  the  resources  the
       curl_global_init(3) call initialized.

       Repeated calls to curl_global_init(3) and curl_global_cleanup(3) should
       be avoided. They should only be called once each.


Features libcurl Provides

       It  is  considered  best-practice to determine libcurl features at run-
       time rather than at build-time (if  possible  of  course).  By  calling
       curl_version_info(3)  and  checking  out  the  details  of the returned
       struct, your program can figure out exactly what the currently  running
       libcurl supports.


Handle the Easy libcurl

       libcurl  first  introduced the so called easy interface. All operations
       in the easy interface are prefixed with 'curl_easy'.

       Recent libcurl versions also offer the multi interface. More about that
       interface,  what  it is targeted for and how to use it is detailed in a
       separate chapter further down. You still need to  understand  the  easy
       interface first, so please continue reading for better understanding.

       To  use the easy interface, you must first create yourself an easy han-
       dle. You need one handle for each easy session  you  want  to  perform.
       Basically,  you  should use one handle for every thread you plan to use
       for transferring. You must never share  the  same  handle  in  multiple
       threads.

       Get an easy handle with

        easyhandle = curl_easy_init();

       It  returns  an  easy  handle. Using that you proceed to the next step:
       setting up your preferred actions. A handle is just a logic entity  for
       the upcoming transfer or series of transfers.

       You    set    properties    and   options   for   this   handle   using
       curl_easy_setopt(3). They control how the subsequent transfer or trans-
       fers  will be made. Options remain set in the handle until set again to
       something different. Alas, multiple requests using the same handle will
       use the same options.

       Many  of the options you set in libcurl are "strings", pointers to data
       terminated with a zero byte. Keep in mind that  when  you  set  strings
       with  curl_easy_setopt(3),  libcurl  will  not  copy  the data. It will
       merely point to the data. You MUST make  sure  that  the  data  remains
       available  for  libcurl to use until finished or until you use the same
       option again to point to something else.

       One of the most basic properties to set in the handle is the  URL.  You
       set your preferred URL to transfer with CURLOPT_URL in a manner similar
       to:

        curl_easy_setopt(handle, CURLOPT_URL, "http://domain.com/");

       Let's assume for a while that you want to receive data as the URL iden-
       tifies  a  remote resource you want to get here. Since you write a sort
       of application that needs this transfer, I assume that you  would  like
       to  get  the  data  passed to you directly instead of simply getting it
       passed to stdout. So, you write your own  function  that  matches  this
       prototype:

        size_t  write_data(void  *buffer,  size_t  size,  size_t  nmemb,  void
       *userp);

       You tell libcurl to pass all data to this function by issuing  a  func-
       tion similar to this:

        curl_easy_setopt(easyhandle, CURLOPT_WRITEFUNCTION, write_data);

       You  can  control  what data your function get in the forth argument by
       setting another property:

        curl_easy_setopt(easyhandle, CURLOPT_WRITEDATA, &internal_struct);

       Using that property, you can easily pass local data between your appli-
       cation  and  the  function that gets invoked by libcurl. libcurl itself
       won't touch the data you pass with CURLOPT_WRITEDATA.

       libcurl offers its own default internal callback that'll take  care  of
       the  data  if you don't set the callback with CURLOPT_WRITEFUNCTION. It
       will then simply output the received data to stdout. You can  have  the
       default callback write the data to a different file handle by passing a
       'FILE *' to a  file  opened  for  writing  with  the  CURLOPT_WRITEDATA
       option.

       Now,  we need to take a step back and have a deep breath. Here's one of
       those rare platform-dependent nitpicks. Did you spot it? On some  plat-
       forms[2],  libcurl won't be able to operate on files opened by the pro-
       gram. Thus, if you use the default callback and pass in  an  open  file
       with  CURLOPT_WRITEDATA, it will crash. You should therefore avoid this
       to make your program run fine virtually everywhere.

       (CURLOPT_WRITEDATA was formerly known as CURLOPT_FILE. Both names still
       work and do the same thing).

       If you're using libcurl as a win32 DLL, you MUST use the CURLOPT_WRITE-
       FUNCTION if you set CURLOPT_WRITEDATA - or you will experience crashes.

       There  are  of course many more options you can set, and we'll get back
       to a few of them later. Let's instead continue to the actual transfer:

        success = curl_easy_perform(easyhandle);

       curl_easy_perform(3) will connect to the remote site, do the  necessary
       commands  and receive the transfer. Whenever it receives data, it calls
       the callback function we previously set. The function may get one  byte
       at  a  time,  or it may get many kilobytes at once. libcurl delivers as
       much as possible as often as possible. Your  callback  function  should
       return  the number of bytes it "took care of". If that is not the exact
       same amount of bytes that was passed to  it,  libcurl  will  abort  the
       operation and return with an error code.

       When  the transfer is complete, the function returns a return code that
       informs you if it succeeded in its mission or not.  If  a  return  code
       isn't  enough  for  you,  you  can use the CURLOPT_ERRORBUFFER to point
       libcurl to a buffer of yours where it'll store a human  readable  error
       message as well.

       If  you  then  want to transfer another file, the handle is ready to be
       used again. Mind you, it is even preferred that you re-use an  existing
       handle  if  you  intend  to  make  another  transfer. libcurl will then
       attempt to re-use the previous connection.


Multi-threading Issues

       The first basic rule is that you must never share a libcurl handle  (be
       it  easy  or  multi or whatever) between multiple threads. Only use one
       handle in one thread at a time.

       libcurl is completely thread safe, except for two issues:  signals  and
       SSL/TLS handlers. Signals are used timeouting name resolves (during DNS
       lookup) - when built without c-ares support and not on Windows..

       If you are accessing HTTPS or FTPS URLs in a multi-threaded manner, you
       are  then of course using the underlying SSL library multi-threaded and
       those libs might have their own requirements on this issue.  Basically,
       you  need to provide one or two functions to allow it to function prop-
       erly. For all details, see this:

       OpenSSL

        http://www.openssl.org/docs/crypto/threads.html#DESCRIPTION

       GnuTLS

        http://www.gnu.org/software/gnutls/man-
       ual/html_node/Multi_002dthreaded-applications.html

       NSS

        is claimed to be thread-safe already without anything required

       yassl

        Required actions unknown

       When  using multiple threads you should set the CURLOPT_NOSIGNAL option
       to TRUE for all handles. Everything will or might work fine except that
       timeouts  are  not  honored  during the DNS lookup - which you can work
       around by building libcurl with c-ares support.  c-ares  is  a  library
       that  provides  asynchronous  name resolves. Unfortunately, c-ares does
       not yet fully support IPv6. On some platforms, libcurl simply will  not
       function properly multi-threaded unless this option is set.

       Also, note that CURLOPT_DNS_USE_GLOBAL_CACHE is not thread-safe.


When It Doesn't Work

       There will always be times when the transfer fails for some reason. You
       might have set the wrong  libcurl  option  or  misunderstood  what  the
       libcurl  option  actually  does, or the remote server might return non-
       standard replies that confuse the library which then confuses your pro-
       gram.

       There's  one  golden rule when these things occur: set the CURLOPT_VER-
       BOSE option to TRUE. It'll cause the library to  spew  out  the  entire
       protocol  details it sends, some internal info and some received proto-
       col data as well (especially when using FTP).  If  you're  using  HTTP,
       adding the headers in the received output to study is also a clever way
       to get a better understanding why the server behaves the way  it  does.
       Include headers in the normal body output with CURLOPT_HEADER set TRUE.

       Of course there are bugs left. We need to get to know about them to  be
       able  to  fix  them, so we're quite dependent on your bug reports! When
       you do report suspected bugs in libcurl, please include as much details
       you  possibly  can:  a  protocol  dump  that  CURLOPT_VERBOSE produces,
       library version, as much as possible of your code  that  uses  libcurl,
       operating system name and version, compiler name and version etc.

       If  CURLOPT_VERBOSE is not enough, you increase the level of debug data
       your application receive by using the CURLOPT_DEBUGFUNCTION.

       Getting some in-depth knowledge about the protocols involved  is  never
       wrong,  and  if  you're  trying to do funny things, you might very well
       understand libcurl and how to use it better if you study the  appropri-
       ate RFC documents at least briefly.


Upload Data to a Remote Site

       libcurl  tries  to  keep a protocol independent approach to most trans-
       fers, thus uploading to a remote FTP site is very similar to  uploading
       data to a HTTP server with a PUT request.

       Of  course,  first  you  either create an easy handle or you re-use one
       existing one. Then you set the URL to operate on just like before. This
       is the remote URL, that we now will upload.

       Since  we  write an application, we most likely want libcurl to get the
       upload data by asking us for it. To make it do that, we  set  the  read
       callback and the custom pointer libcurl will pass to our read callback.
       The read callback should have a prototype similar to:

        size_t  function(char  *bufptr,  size_t  size,  size_t  nitems,   void
       *userp);

       Where  bufptr is the pointer to a buffer we fill in with data to upload
       and size*nitems is the size of the buffer and therefore also the  maxi-
       mum  amount  of data we can return to libcurl in this call. The 'userp'
       pointer is the custom pointer we set to point to a struct  of  ours  to
       pass private data between the application and the callback.

        curl_easy_setopt(easyhandle, CURLOPT_READFUNCTION, read_function);

        curl_easy_setopt(easyhandle, CURLOPT_INFILE, &filedata);

       Tell libcurl that we want to upload:

        curl_easy_setopt(easyhandle, CURLOPT_UPLOAD, TRUE);

       A few protocols won't behave properly when uploads are done without any
       prior knowledge of the expected file size. So, set the upload file size
       using  the  CURLOPT_INFILESIZE_LARGE  for  all  known  file  sizes like
       this[1]:

        /* in this example, file_size must be an off_t variable */
        curl_easy_setopt(easyhandle, CURLOPT_INFILESIZE_LARGE, file_size);

       When you call curl_easy_perform(3) this time,  it'll  perform  all  the
       necessary operations and when it has invoked the upload it'll call your
       supplied callback to get the data to upload. The program should  return
       as much data as possible in every invoke, as that is likely to make the
       upload perform as fast as possible. The callback should return the num-
       ber of bytes it wrote in the buffer. Returning 0 will signal the end of
       the upload.


Passwords

       Many protocols use or even require that user name and password are pro-
       vided to be able to download or upload the data of your choice. libcurl
       offers several ways to specify them.

       Most protocols support that you specify the name and  password  in  the
       URL  itself. libcurl will detect this and use them accordingly. This is
       written like this:

        protocol://user:password@example.com/path/

       If you need any odd letters in your user name or password,  you  should
       enter them URL encoded, as %XX where XX is a two-digit hexadecimal num-
       ber.

       libcurl also provides options to set various passwords. The  user  name
       and  password as shown embedded in the URL can instead get set with the
       CURLOPT_USERPWD option. The argument passed to libcurl should be a char
       * to a string in the format "user:password:". In a manner like this:

        curl_easy_setopt(easyhandle, CURLOPT_USERPWD, "myname:thesecret");

       Another  case  where name and password might be needed at times, is for
       those users who need to authenticate themselves to a  proxy  they  use.
       libcurl offers another option for this, the CURLOPT_PROXYUSERPWD. It is
       used quite similar to the CURLOPT_USERPWD option like this:

        curl_easy_setopt(easyhandle,   CURLOPT_PROXYUSERPWD,    "myname:these-
       cret");

       There's  a  long time unix "standard" way of storing ftp user names and
       passwords, namely in the $HOME/.netrc file. The  file  should  be  made
       private  so that only the user may read it (see also the "Security Con-
       siderations" chapter), as it might contain the password in plain  text.
       libcurl has the ability to use this file to figure out what set of user
       name and password to use for a particular host. As an extension to  the
       normal  functionality, libcurl also supports this file for non-FTP pro-
       tocols such as HTTP. To make curl use this file, use the  CURLOPT_NETRC
       option:

        curl_easy_setopt(easyhandle, CURLOPT_NETRC, TRUE);

       And a very basic example of how such a .netrc file may look like:

        machine myhost.mydomain.com
        login userlogin
        password secretword

       All  these  examples  have  been  cases  where  the  password  has been
       optional, or at least you could leave it out and have  libcurl  attempt
       to  do  its  job  without  it.  There are times when the password isn't
       optional, like when you're using an SSL private key for  secure  trans-
       fers.

       To pass the known private key password to libcurl:

        curl_easy_setopt(easyhandle, CURLOPT_SSLKEYPASSWD, "keypassword");


HTTP Authentication

       The  previous chapter showed how to set user name and password for get-
       ting URLs that require authentication. When using  the  HTTP  protocol,
       there are many different ways a client can provide those credentials to
       the server and you can control what way libcurl will (attempt to)  use.
       The  default  HTTP  authentication  method  is called 'Basic', which is
       sending the name and  password  in  clear-text  in  the  HTTP  request,
       base64-encoded. This is insecure.

       At the time of this writing libcurl can be built to use: Basic, Digest,
       NTLM, Negotiate, GSS-Negotiate and SPNEGO. You can tell  libcurl  which
       one to use with CURLOPT_HTTPAUTH as in:

        curl_easy_setopt(easyhandle, CURLOPT_HTTPAUTH, CURLAUTH_DIGEST);

       And when you send authentication to a proxy, you can also set authenti-
       cation type the same way but instead with CURLOPT_PROXYAUTH:

        curl_easy_setopt(easyhandle, CURLOPT_PROXYAUTH, CURLAUTH_NTLM);

       Both these options allow you to  set  multiple  types  (by  ORing  them
       together),  to  make  libcurl pick the most secure one out of the types
       the server/proxy claims to support. This  method  does  however  add  a
       round-trip since libcurl must first ask the server what it supports:

        curl_easy_setopt(easyhandle, CURLOPT_HTTPAUTH,
        CURLAUTH_DIGEST|CURLAUTH_BASIC);

       For  convenience,  you  can use the 'CURLAUTH_ANY' define (instead of a
       list with specific types) which allows libcurl to use  whatever  method
       it wants.

       When  asking for multiple types, libcurl will pick the available one it
       considers "best" in its own internal order of preference.


HTTP POSTing

       We get many questions regarding how to issue HTTP  POSTs  with  libcurl
       the proper way. This chapter will thus include examples using both dif-
       ferent versions of HTTP POST that libcurl supports.

       The first version is the simple POST, the  most  common  version,  that
       most  HTML pages using the <form> tag uses. We provide a pointer to the
       data and tell libcurl to post it all to the remote site:

           char *data="name=daniel&project=curl";
           curl_easy_setopt(easyhandle, CURLOPT_POSTFIELDS, data);
           curl_easy_setopt(easyhandle, CURLOPT_URL, "http://posthere.com/");

           curl_easy_perform(easyhandle); /* post away! */

       Simple enough, huh? Since you  set  the  POST  options  with  the  CUR-
       LOPT_POSTFIELDS,  this automatically switches the handle to use POST in
       the upcoming request.

       Ok, so what if you want to post binary data that also requires  you  to
       set  the  Content-Type: header of the post? Well, binary posts prevents
       libcurl from being able to do strlen() on the data to  figure  out  the
       size, so therefore we must tell libcurl the size of the post data. Set-
       ting headers in libcurl requests are done in a generic way, by building
       a list of our own headers and then passing that list to libcurl.

        struct curl_slist *headers=NULL;
        headers = curl_slist_append(headers, "Content-Type: text/xml");

        /* post binary data */
        curl_easy_setopt(easyhandle, CURLOPT_POSTFIELDS, binaryptr);

        /* set the size of the postfields data */
        curl_easy_setopt(easyhandle, CURLOPT_POSTFIELDSIZE, 23);

        /* pass our list of custom made headers */
        curl_easy_setopt(easyhandle, CURLOPT_HTTPHEADER, headers);

        curl_easy_perform(easyhandle); /* post away! */

        curl_slist_free_all(headers); /* free the header list */

       While  the  simple examples above cover the majority of all cases where
       HTTP POST operations are required, they don't do multi-part  formposts.
       Multi-part  formposts were introduced as a better way to post (possibly
       large) binary data and was first documented  in  the  RFC1867.  They're
       called multi-part because they're built by a chain of parts, each being
       a single unit. Each part has its own name and contents. You can in fact
       create  and  post  a  multi-part formpost with the regular libcurl POST
       support described above, but that would require that you build a  form-
       post yourself and provide to libcurl. To make that easier, libcurl pro-
       vides curl_formadd(3). Using this function, you add parts to the  form.
       When you're done adding parts, you post the whole form.

       The  following  example  sets  two simple text parts with plain textual
       contents, and then a file with binary contents  and  upload  the  whole
       thing.

        struct curl_httppost *post=NULL;
        struct curl_httppost *last=NULL;
        curl_formadd(&post, &last,
                     CURLFORM_COPYNAME, "name",
                     CURLFORM_COPYCONTENTS, "daniel", CURLFORM_END);
        curl_formadd(&post, &last,
                     CURLFORM_COPYNAME, "project",
                     CURLFORM_COPYCONTENTS, "curl", CURLFORM_END);
        curl_formadd(&post, &last,
                     CURLFORM_COPYNAME, "logotype-image",
                     CURLFORM_FILECONTENT, "curl.png", CURLFORM_END);

        /* Set the form info */
        curl_easy_setopt(easyhandle, CURLOPT_HTTPPOST, post);

        curl_easy_perform(easyhandle); /* post away! */

        /* free the post data again */
        curl_formfree(post);

       Multipart formposts are chains of parts using MIME-style separators and
       headers. It means that each one of these separate parts get a few head-
       ers  set that describe the individual content-type, size etc. To enable
       your application to handicraft this formpost even more, libcurl  allows
       you to supply your own set of custom headers to such an individual form
       part. You can of course supply headers to as many parts you  like,  but
       this  little example will show how you set headers to one specific part
       when you add that to the post handle:

        struct curl_slist *headers=NULL;
        headers = curl_slist_append(headers, "Content-Type: text/xml");

        curl_formadd(&post, &last,
                     CURLFORM_COPYNAME, "logotype-image",
                     CURLFORM_FILECONTENT, "curl.xml",
                     CURLFORM_CONTENTHEADER, headers,
                     CURLFORM_END);

        curl_easy_perform(easyhandle); /* post away! */

        curl_formfree(post); /* free post */
        curl_slist_free_all(post); /* free custom header list */

       Since all options on an easyhandle are "sticky", they remain  the  same
       until changed even if you do call curl_easy_perform(3), you may need to
       tell curl to go back to a plain GET request if you intend to do such  a
       one  as  your  next  request. You force an easyhandle to back to GET by
       using the CURLOPT_HTTPGET option:

        curl_easy_setopt(easyhandle, CURLOPT_HTTPGET, TRUE);

       Just setting CURLOPT_POSTFIELDS to "" or NULL will *not*  stop  libcurl
       from  doing a POST. It will just make it POST without any data to send!


Showing Progress

       For historical and traditional reasons, libcurl has a built-in progress
       meter  that  can  be  switched on and then makes it presents a progress
       meter in your terminal.

       Switch on the progress meter by, oddly enough,  set  CURLOPT_NOPROGRESS
       to FALSE. This option is set to TRUE by default.

       For  most  applications however, the built-in progress meter is useless
       and what instead is interesting is the ability to  specify  a  progress
       callback.  The function pointer you pass to libcurl will then be called
       on irregular intervals with information about the current transfer.

       Set the progress callback by using CURLOPT_PROGRESSFUNCTION. And pass a
       pointer to a function that matches this prototype:

        int progress_callback(void *clientp,
                              double dltotal,
                              double dlnow,
                              double ultotal,
                              double ulnow);

       If any of the input arguments is unknown, a 0 will be passed. The first
       argument, the 'clientp' is the pointer you pass to  libcurl  with  CUR-
       LOPT_PROGRESSDATA. libcurl won't touch it.


libcurl with C++

       There's basically only one thing to keep in mind when using C++ instead
       of C when interfacing libcurl:

       The callbacks CANNOT be non-static class member functions

       Example C++ code:

       class AClass {
           static size_t write_data(void *ptr, size_t size, size_t nmemb,
                                    void *ourpointer)
           {
             /* do what you want with the data */
           }
        }


Proxies

       What "proxy" means according to Merriam-Webster: "a  person  authorized
       to  act  for  another"  but  also "the agency, function, or office of a
       deputy who acts as a substitute for another".

       Proxies are exceedingly common these days. Companies often  only  offer
       Internet  access to employees through their proxies. Network clients or
       user-agents ask the proxy for documents,  the  proxy  does  the  actual
       request and then it returns them.

       libcurl  supports  SOCKS  and HTTP proxies. When a given URL is wanted,
       libcurl will ask the proxy for it instead of trying to connect  to  the
       actual host identified in the URL.

       If  you're using a SOCKS proxy, you may find that libcurl doesn't quite
       support all operations through it.

       For HTTP proxies: the fact that the proxy is a HTTP proxy puts  certain
       restrictions  on  what  can actually happen. A requested URL that might
       not be a HTTP URL will be still be passed to the HTTP proxy to  deliver
       back to libcurl. This happens transparently, and an application may not
       need to know. I say "may", because at times it  is  very  important  to
       understand that all operations over a HTTP proxy is using the HTTP pro-
       tocol. For example, you can't invoke your own custom  FTP  commands  or
       even proper FTP directory listings.

       Proxy Options

              To tell libcurl to use a proxy at a given port number:

               curl_easy_setopt(easyhandle,       CURLOPT_PROXY,       "proxy-
              host.com:8080");

              Some proxies  require  user  authentication  before  allowing  a
              request, and you pass that information similar to this:

               curl_easy_setopt(easyhandle,  CURLOPT_PROXYUSERPWD, "user:pass-
              word");

              If you want to, you can specify the host name only in  the  CUR-
              LOPT_PROXY  option, and set the port number separately with CUR-
              LOPT_PROXYPORT.

              Tell libcurl what kind of proxy it is with CURLOPT_PROXYTYPE (if
              not, it will default to assume a HTTP proxy):

               curl_easy_setopt(easyhandle,      CURLOPT_PROXYTYPE,      CURL-
              PROXY_SOCKS4);

       Environment Variables

              libcurl automatically checks and uses a set of environment vari-
              ables  to  know  what  proxies to use for certain protocols. The
              names of the variables are following an ancient de  facto  stan-
              dard and are built up as "[protocol]_proxy" (note the lower cas-
              ing). Which makes the variable HTTP. Following  the  same  rule,
              the  variable  named 'ftp_proxy' is checked for FTP URLs. Again,
              the proxies are always HTTP proxies, the different names of  the
              variables simply allows different HTTP proxies to be used.

              The  proxy environment variable contents should be in the format
              "[protocol://][user:password@]machine[:port]". Where the  proto-
              col://  part  is  simply ignored if present (so http://proxy and
              bluerk://proxy will do the same) and the  optional  port  number
              specifies  on  which port the proxy operates on the host. If not
              specified, the internal default port number  will  be  used  and
              that is most likely *not* the one you would like it to be.

              There are two special environment variables. 'all_proxy' is what
              sets proxy for any URL in case the  protocol  specific  variable
              wasn't  set,  and 'no_proxy' defines a list of hosts that should
              not use a proxy even though a variable may say so. If 'no_proxy'
              is a plain asterisk ("*") it matches all hosts.

              To explicitly disable libcurl's checking for and using the proxy
              environment variables, set the proxy  name  to  ""  -  an  empty
              string - with CURLOPT_PROXY.

       SSL and Proxies

              SSL  is  for  secure  point-to-point  connections. This involves
              strong encryption and similar things, which effectively makes it
              impossible  for  a  proxy to operate as a "man in between" which
              the proxy's task is, as previously discussed. Instead, the  only
              way  to  have  SSL work over a HTTP proxy is to ask the proxy to
              tunnel trough everything without being able to check  or  fiddle
              with the traffic.

              Opening an SSL connection over a HTTP proxy is therefor a matter
              of asking the proxy for a straight connection to the target host
              on a specified port. This is made with the HTTP request CONNECT.
              ("please mr proxy, connect me to that remote host").

              Because of the nature of this operation, where the proxy has  no
              idea  what  kind  of data that is passed in and out through this
              tunnel, this breaks some of the very few  advantages  that  come
              from using a proxy, such as caching.  Many organizations prevent
              this kind of tunneling to other destination  port  numbers  than
              443 (which is the default HTTPS port number).

       Tunneling Through Proxy
              As  explained  above,  tunneling is required for SSL to work and
              often even restricted to the operation intended for SSL;  HTTPS.

              This  is  however  not the only time proxy-tunneling might offer
              benefits to you or your application.

              As tunneling opens a direct connection from your application  to
              the  remote  machine, it suddenly also re-introduces the ability
              to do non-HTTP operations over a HTTP proxy. You can in fact use
              things such as FTP upload or FTP custom commands this way.

              Again,  this is often prevented by the administrators of proxies
              and is rarely allowed.

              Tell libcurl to use proxy tunneling like this:

               curl_easy_setopt(easyhandle, CURLOPT_HTTPPROXYTUNNEL, TRUE);

              In fact, there might even be times when you  want  to  do  plain
              HTTP operations using a tunnel like this, as it then enables you
              to operate on the remote server instead of asking the  proxy  to
              do  so.  libcurl  will  not stand in the way for such innovative
              actions either!

       Proxy Auto-Config

              Netscape first came up with this. It is  basically  a  web  page
              (usually  using  a  .pac  extension) with a javascript that when
              executed by the browser with the requested URL as input, returns
              information  to  the  browser  on how to connect to the URL. The
              returned information might be "DIRECT"  (which  means  no  proxy
              should  be  used),  "PROXY host:port" (to tell the browser where
              the proxy for this particular URL is) or "SOCKS  host:port"  (to
              direct the browser to a SOCKS proxy).

              libcurl  has  no  means  to interpret or evaluate javascript and
              thus it doesn't support this. If you get yourself in a  position
              where  you  face this nasty invention, the following advice have
              been mentioned and used in the past:

              - Depending on the javascript complexity, write up a script that
              translates it to another language and execute that.

              - Read the javascript code and rewrite the same logic in another
              language.

              - Implement a javascript interpreted, people  have  successfully
              used the Mozilla javascript engine in the past.

              - Ask your admins to stop this, for a static proxy setup or sim-
              ilar.


Persistence Is The Way to Happiness

       Re-cycling the same easy  handle  several  times  when  doing  multiple
       requests is the way to go.

       After each single curl_easy_perform(3) operation, libcurl will keep the
       connection alive and open. A subsequent request  using  the  same  easy
       handle to the same host might just be able to use the already open con-
       nection! This reduces network impact a lot.

       Even if the connection is dropped, all connections involving SSL to the
       same  host  again,  will  benefit  from libcurl's session ID cache that
       drastically reduces re-connection time.

       FTP connections that are kept alive saves a lot of time,  as  the  com-
       mand- response round-trips are skipped, and also you don't risk getting
       blocked without permission to login again like on many FTP servers only
       allowing N persons to be logged in at the same time.

       libcurl  caches DNS name resolving results, to make lookups of a previ-
       ously looked up name a lot faster.

       Other interesting  details  that  improve  performance  for  subsequent
       requests may also be added in the future.

       Each  easy  handle  will attempt to keep the last few connections alive
       for a while in case they are to be used again. You can set the size  of
       this  "cache"  with the CURLOPT_MAXCONNECTS option. Default is 5. It is
       very seldom any point in changing this  value,  and  if  you  think  of
       changing this it is often just a matter of thinking again.

       To  force  your upcoming request to not use an already existing connec-
       tion (it will even close one first if there happens to be one alive  to
       the  same  host you're about to operate on), you can do that by setting
       CURLOPT_FRESH_CONNECT to TRUE. In a similar spirit, you can also forbid
       the  upcoming  request  to  be  "lying" around and possibly get re-used
       after the request by setting CURLOPT_FORBID_REUSE to TRUE.


HTTP Headers Used by libcurl

       When you use libcurl to do HTTP requests, it'll pass along a series  of
       headers  automatically. It might be good for you to know and understand
       these ones. You can replace or remove them by using  the  CURLOPT_HTTP-
       HEADER option.

       Host   This  header  is  required by HTTP 1.1 and even many 1.0 servers
              and should be the name of the server we want to  talk  to.  This
              includes the port number if anything but default.

       Pragma "no-cache".  Tells  a possible proxy to not grab a copy from the
              cache but to fetch a fresh one.

       Accept "*/*".

       Expect When doing POST requests, libcurl sets this header to  "100-con-
              tinue"  to ask the server for an "OK" message before it proceeds
              with sending the data part of  the  post.  If  the  POSTed  data
              amount is deemed "small", libcurl will not use this header.


Customizing Operations

       There is an ongoing development today where more and more protocols are
       built upon HTTP for transport. This has obvious benefits as HTTP  is  a
       tested and reliable protocol that is widely deployed and have excellent
       proxy-support.

       When you use one of these protocols, and even when doing other kinds of
       programming  you may need to change the traditional HTTP (or FTP or...)
       manners. You may need to change words, headers or various data.

       libcurl is your friend here too.

       CUSTOMREQUEST
              If just changing the actual HTTP request  keyword  is  what  you
              want,  like  when  GET, HEAD or POST is not good enough for you,
              CURLOPT_CUSTOMREQUEST is there for you. It  is  very  simple  to
              use:

               curl_easy_setopt(easyhandle,   CURLOPT_CUSTOMREQUEST,   "MYOWN-
              RUQUEST");

              When using the custom request, you change the request keyword of
              the actual request you are performing. Thus, by default you make
              GET request but you can also make a POST operation (as described
              before) and then replace the POST keyword if you want to. You're
              the boss.

       Modify Headers
              HTTP-like protocols pass a series of headers to the server  when
              doing  the  request, and you're free to pass any amount of extra
              headers that you think fit. Adding headers are this easy:

               struct curl_slist *headers=NULL; /* init to NULL is important */

               headers = curl_slist_append(headers, "Hey-server-hey: how are you?");
               headers = curl_slist_append(headers, "X-silly-content: yes");

               /* pass our list of custom made headers */
               curl_easy_setopt(easyhandle, CURLOPT_HTTPHEADER, headers);

               curl_easy_perform(easyhandle); /* transfer http */

               curl_slist_free_all(headers); /* free the header list */

              ... and if you think some of the internally  generated  headers,
              such as Accept: or Host: don't contain the data you want them to
              contain, you can replace them by simply setting them too:

               headers = curl_slist_append(headers, "Accept: Agent-007");
               headers = curl_slist_append(headers, "Host: munged.host.line");

       Delete Headers
              If you replace an existing header with one with no contents, you
              will  prevent  the  header  from being sent. Like if you want to
              completely prevent the "Accept:" header to be sent, you can dis-
              able it with code similar to this:

               headers = curl_slist_append(headers, "Accept:");

              Both  replacing  and  canceling  internal headers should be done
              with careful consideration and you should be aware that you  may
              violate the HTTP protocol when doing so.

       Enforcing chunked transfer-encoding

              By making sure a request uses the custom header "Transfer-Encod-
              ing: chunked" when doing a non-GET HTTP operation, libcurl  will
              switch  over  to  "chunked"  upload, even though the size of the
              data to upload might  be  known.  By  default,  libcurl  usually
              switches over to chunked upload automatically if the upload data
              size is unknown.

       HTTP Version

              All HTTP requests includes the version number to tell the server
              which  version  we  support.  libcurl speak HTTP 1.1 by default.
              Some very old servers don't like getting 1.1-requests  and  when
              dealing with stubborn old things like that, you can tell libcurl
              to use 1.0 instead by doing something like this:

               curl_easy_setopt(easyhandle,              CURLOPT_HTTP_VERSION,
              CURL_HTTP_VERSION_1_0);

       FTP Custom Commands

              Not all protocols are HTTP-like, and thus the above may not help
              you when you want to make for  example  your  FTP  transfers  to
              behave differently.

              Sending  custom  commands to a FTP server means that you need to
              send the commands exactly as the FTP server expects them (RFC959
              is  a  good guide here), and you can only use commands that work
              on the control-connection alone.  All  kinds  of  commands  that
              requires  data interchange and thus needs a data-connection must
              be left to libcurl's own judgment. Also be  aware  that  libcurl
              will  do  its very best to change directory to the target direc-
              tory before doing any transfer, so if you change directory (with
              CWD  or similar) you might confuse libcurl and then it might not
              attempt to transfer the file in the correct remote directory.

              A little example that deletes a given file before an operation:

               headers = curl_slist_append(headers, "DELE file-to-remove");

               /* pass the list of custom commands to the handle */
               curl_easy_setopt(easyhandle, CURLOPT_QUOTE, headers);

               curl_easy_perform(easyhandle); /* transfer ftp data! */

               curl_slist_free_all(headers); /* free the header list */

              If you would instead want this operation  (or  chain  of  opera-
              tions) to happen _after_ the data transfer took place the option
              to curl_easy_setopt(3) would instead be called CURLOPT_POSTQUOTE
              and used the exact same way.

              The  custom FTP command will be issued to the server in the same
              order they are added to the list, and if a command gets an error
              code  returned  back  from  the server, no more commands will be
              issued  and  libcurl  will  bail  out   with   an   error   code
              (CURLE_FTP_QUOTE_ERROR).  Note  that if you use CURLOPT_QUOTE to
              send commands before a transfer, no transfer will actually  take
              place when a quote command has failed.

              If  you set the CURLOPT_HEADER to true, you will tell libcurl to
              get information about the target file and output "headers" about
              it. The headers will be in "HTTP-style", looking like they do in
              HTTP.

              The option to enable headers or to run custom FTP  commands  may
              be useful to combine with CURLOPT_NOBODY. If this option is set,
              no actual file content transfer will be performed.

       FTP Custom CUSTOMREQUEST
              If you do what list the contents of a FTP directory  using  your
              own  defined  FTP  command,  CURLOPT_CUSTOMREQUEST  will do just
              that. "NLST" is the default  one  for  listing  directories  but
              you're free to pass in your idea of a good alternative.


Cookies Without Chocolate Chips

       In  the  HTTP  sense,  a  cookie  is a name with an associated value. A
       server sends the name and value to the client, and expects  it  to  get
       sent  back  on  every subsequent request to the server that matches the
       particular conditions set. The conditions include that the domain  name
       and path match and that the cookie hasn't become too old.

       In  real-world  cases, servers send new cookies to replace existing one
       to update them. Server use cookies to "track" users and to  keep  "ses-
       sions".

       Cookies are sent from server to clients with the header Set-Cookie: and
       they're sent from clients to servers with the Cookie: header.

       To just send whatever cookie you want to a server,  you  can  use  CUR-
       LOPT_COOKIE to set a cookie string like this:

        curl_easy_setopt(easyhandle,        CURLOPT_COOKIE,       "name1=var1;
       name2=var2;");

       In many cases, that is not enough. You might want to  dynamically  save
       whatever  cookies  the remote server passes to you, and make sure those
       cookies are then use accordingly on later requests.

       One way to do this, is to save all headers you receive in a plain  file
       and  when  you  make  a  request, you tell libcurl to read the previous
       headers to figure out which cookies to use. Set  header  file  to  read
       cookies from with CURLOPT_COOKIEFILE.

       The  CURLOPT_COOKIEFILE  option  also  automatically enables the cookie
       parser in libcurl. Until the cookie parser is enabled, libcurl will not
       parse  or  understand  incoming  cookies and they will just be ignored.
       However, when the parser is enabled the cookies will be understood  and
       the  cookies  will  be  kept  in memory and used properly in subsequent
       requests when the same handle is used. Many times this is  enough,  and
       you may not have to save the cookies to disk at all. Note that the file
       you specify to CURLOPT_COOKIEFILE doesn't have to exist to  enable  the
       parser,  so  a  common  way to just enable the parser and not read able
       might be to use a file name you know doesn't exist.

       If you rather use existing cookies that you've previously received with
       your Netscape or Mozilla browsers, you can make libcurl use that cookie
       file as input. The CURLOPT_COOKIEFILE is used for that too, as  libcurl
       will  automatically  find  out  what kind of file it is and act accord-
       ingly.

       The perhaps most advanced cookie operation libcurl  offers,  is  saving
       the entire internal cookie state back into a Netscape/Mozilla formatted
       cookie file. We call that the cookie-jar. When you set a file name with
       CURLOPT_COOKIEJAR,  that  file  name  will  be created and all received
       cookies will be stored in it when curl_easy_cleanup(3) is called.  This
       enabled  cookies  to  get  passed  on properly between multiple handles
       without any information getting lost.


FTP Peculiarities We Need

       FTP transfers use a second TCP/IP connection  for  the  data  transfer.
       This is usually a fact you can forget and ignore but at times this fact
       will come back to haunt you. libcurl offers several different  ways  to
       custom how the second connection is being made.

       libcurl  can  either  connect  to  the server a second time or tell the
       server to connect back to it. The first option is the default and it is
       also  what  works best for all the people behind firewalls, NATs or IP-
       masquerading setups.  libcurl then tells the server to open  up  a  new
       port  and  wait  for  a second connection. This is by default attempted
       with EPSV first, and if that doesn't work it tries PASV instead.  (EPSV
       is an extension to the original FTP spec and does not exist nor work on
       all FTP servers.)

       You can prevent libcurl from first trying the EPSV command  by  setting
       CURLOPT_FTP_USE_EPSV to FALSE.

       In  some  cases, you will prefer to have the server connect back to you
       for the second connection. This might be when  the  server  is  perhaps
       behind  a firewall or something and only allows connections on a single
       port. libcurl then informs the remote server which IP address and  port
       number to connect to.  This is made with the CURLOPT_FTPPORT option. If
       you set it to "-", libcurl will use your system's "default IP address".
       If  you want to use a particular IP, you can set the full IP address, a
       host name to resolve to an IP address or even a local network interface
       name that libcurl will get the IP address from.

       When  doing  the  "PORT" approach, libcurl will attempt to use the EPRT
       and the LPRT before trying PORT, as they work with more protocols.  You
       can disable this behavior by setting CURLOPT_FTP_USE_EPRT to FALSE.


Headers Equal Fun

       Some  protocols  provide "headers", meta-data separated from the normal
       data. These headers are by default not  included  in  the  normal  data
       stream, but you can make them appear in the data stream by setting CUR-
       LOPT_HEADER to TRUE.

       What might be even more useful, is libcurl's ability  to  separate  the
       headers  from  the data and thus make the callbacks differ. You can for
       example set a different pointer to pass to the ordinary write  callback
       by setting CURLOPT_WRITEHEADER.

       Or,  you  can set an entirely separate function to receive the headers,
       by using CURLOPT_HEADERFUNCTION.

       The headers are passed to the callback function one by one, and you can
       depend  on  that  fact. It makes it easier for you to add custom header
       parsers etc.

       "Headers" for FTP transfers equal all the FTP  server  responses.  They
       aren't actually true headers, but in this case we pretend they are! ;-)


Post Transfer Information

        [ curl_easy_getinfo ]


Security Considerations

       libcurl is in itself not insecure. If used the right way, you  can  use
       libcurl to transfer data pretty safely.

       There  are  of  course  many things to consider that may loosen up this
       situation:

       Command Lines
              If you use a command line tool (such as curl) that uses libcurl,
              and  you  give  option  to  the  tool  on the command line those
              options can very likely get read by other users of  your  system
              when they use 'ps' or other tools to list currently running pro-
              cesses.

              To avoid this problem, never feed sensitive things  to  programs
              using command line options.

       .netrc .netrc  is  a pretty handy file/feature that allows you to login
              quickly and automatically to frequently visited sites. The  file
              contains passwords in clear text and is a real security risk. In
              some cases, your .netrc is also stored in a home directory  that
              is  NFS mounted or used on another network based file system, so
              the clear text password will fly through your network every time
              anyone reads that file!

              To  avoid  this  problem, don't use .netrc files and never store
              passwords in plain text anywhere.

       Clear Text Passwords
              Many of the protocols libcurl supports send  name  and  password
              unencrypted  as clear text (HTTP Basic authentication, FTP, TEL-
              NET etc). It is very easy for anyone on your network or  a  net-
              work  nearby  yours, to just fire up a network analyzer tool and
              eavesdrop on your passwords. Don't let the fact that  HTTP  uses
              base64 encoded passwords fool you. They may not look readable at
              a first glance, but they  very  easily  "deciphered"  by  anyone
              within seconds.

              To avoid this problem, use protocols that don't let snoopers see
              your password: HTTPS, FTPS and FTP-kerberos are a few  examples.
              HTTP  Digest authentication allows this too, but isn't supported
              by libcurl as of this writing.

       Showing What You Do
              On a related issue, be aware that even in situations  like  when
              you  have problems with libcurl and ask someone for help, every-
              thing you reveal in order to get best possible help  might  also
              impose  certain  security related risks. Host names, user names,
              paths, operating system specifics etc (not to mention  passwords
              of  course)  may in fact be used by intruders to gain additional
              information of a potential target.

              To avoid this problem, you must of course use your common sense.
              Often,  you  can  just  edit  out  the  sensitive  data  or just
              search/replace your true information with faked data.


Multiple Transfers Using the multi Interface

       The easy interface as described in detail in this document  is  a  syn-
       chronous interface that transfers one file at a time and doesn't return
       until its done.

       The multi interface on the other hand, allows your program to  transfer
       multiple files in both directions at the same time, without forcing you
       to use multiple threads.

       To use this interface, you are better off if you first  understand  the
       basics  of how to use the easy interface. The multi interface is simply
       a way to make multiple transfers at the same time, by adding up  multi-
       ple easy handles in to a "multi stack".

       You  create  the easy handles you want and you set all the options just
       like you have been told above, and then you create a multi handle  with
       curl_multi_init(3)  and add all those easy handles to that multi handle
       with curl_multi_add_handle(3).

       When you've added the handles you have for the moment  (you  can  still
       add   new   ones  at  any  time),  you  start  the  transfers  by  call
       curl_multi_perform(3).

       curl_multi_perform(3) is asynchronous. It will only execute  as  little
       as  possible  and  then  return  back  control  to  your program. It is
       designed to never block. If  it  returns  CURLM_CALL_MULTI_PERFORM  you
       better  call it again soon, as that is a signal that it still has local
       data to send or remote data to receive.

       The best usage of this interface is when you do a select() on all  pos-
       sible  file  descriptors or sockets to know when to call libcurl again.
       This also makes it easy for you to wait and respond to actions on  your
       own  application's sockets/handles. You figure out what to select() for
       by using curl_multi_fdset(3), that fills in a set of  fd_set  variables
       for  you  with  the  particular  file  descriptors libcurl uses for the
       moment.

       When you then call select(), it'll return when one of the file  handles
       signal  action and you then call curl_multi_perform(3) to allow libcurl
       to do what it wants to do. Take note that  libcurl  does  also  feature
       some  time-out code so we advice you to never use very long timeouts on
       select() before you call curl_multi_perform(3), which  thus  should  be
       called  unconditionally  every  now  and  then even if none of its file
       descriptors have signaled ready. Another  precaution  you  should  use:
       always  call  curl_multi_fdset(3)  immediately before the select() call
       since the current set of file descriptors may  change  when  calling  a
       curl function.

       If  you  want  to  stop  the transfer of one of the easy handles in the
       stack, you can use  curl_multi_remove_handle(3)  to  remove  individual
       easy    handles.    Remember    that    easy    handles    should    be
       curl_easy_cleanup(3)ed.

       When a transfer within the multi stack has  finished,  the  counter  of
       running   transfers   (as  filled  in  by  curl_multi_perform(3))  will
       decrease. When the number reaches zero, all transfers are done.

       curl_multi_info_read(3) can be used to get information about  completed
       transfers.  It  then  returns  the  CURLcode for each easy transfer, to
       allow you to figure out success on each individual transfer.


SSL, Certificates and Other Tricks

        [ seeding, passwords, keys, certificates, ENGINE, ca certs ]


Sharing Data Between Easy Handles

        [ fill in ]


Footnotes

       [1]    libcurl 7.10.3 and later have the  ability  to  switch  over  to
              chunked  Transfer-Encoding  in  cases were HTTP uploads are done
              with data of an unknown size.

       [2]    This happens on Windows machines when libcurl is built and  used
              as  a DLL. However, you can still do this on Windows if you link
              with a static library.

       [3]    The curl-config tool is generated at  build-time  (on  unix-like
              systems) and should be installed with the 'make install' or sim-
              ilar instruction that installs the library,  header  files,  man
              pages etc.

libcurl                           27 Feb 2007              libcurl-tutorial(3)

Man(1) output converted with man2html