DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH PRINT BOOK
 

ISDN_DISCONNECT_B3.ISDN_REQ(D7isdn)


ISDN_DISCONNECT_B3.ISDN_REQ -- ISDN logical connection disconnect request

Synopsis

   #include <sys/stream.h>
   #include <sys/mdi.h>
   #include <sys/types.h>
   #include <sys/scoisdn.h>
   

typedef struct isdn_disconnect_b3_req { isdnNCCI_t ncci; isdnNCPI_t ncpi; } isdn_disconnect_b3_req_t;

Description

The ISDN_DISCONNECT_B3.ISDN_REQ message consists of one M_PROTO(D7str) message block containing a request to clear a logical connection. The logical connection is identified by the ncci parameter. The ncpi parameter can be used to transfer additional protocol-dependent information.

If the fax group 3 (B protocol T.30) or speech (B1 protocol bit-transparent, B2/B3 protocol transparent) bearer capabilities are in use, data already prepared for transmission using ISDN_DATA_B3.ISDN_REQ(D7isdn) will be sent before clearing the logical connection.

Parameters


ncci
Network Control Connection Identifier; see isdnNCCI(D4isdn).

ncpi
Network Control Protocol Identifier; see isdnNCPI(D4isdn).

References

Intro(D4isdn), Intro(D7isdn)

ISDN_DISCONNECT_B3.ISDN_CONF(D7isdn), ISDN_DISCONNECT_B3.ISDN_IND(D7isdn), ISDN_DISCONNECT_B3.ISDN_RESP(D7isdn)

``SCO ISDN adapter drivers'' in Developing MDI network adapter drivers


19 June 2005
© 2005 The SCO Group, Inc. All rights reserved.
OpenServer 6 and UnixWare (SVR5) HDK - June 2005