/usr/gnu/man/cat.n/tcltest.n.Z(/usr/gnu/man/cat.n/tcltest.n.Z)
______________________________________________________________________________
NAME
tcltest - Test harness support code and utilities
SYNOPSIS
package require tcltest ?2.2.5?
tcltest::test name description ?option value ...?
tcltest::test name description ?constraints? body result
tcltest::loadTestedCommands
tcltest::makeDirectory name ?directory?
tcltest::removeDirectory name ?directory?
tcltest::makeFile contents name ?directory?
tcltest::removeFile name ?directory?
tcltest::viewFile name ?directory?
tcltest::cleanupTests ?runningMultipleTests?
tcltest::runAllTests
tcltest::configure
tcltest::configure option
tcltest::configure option value ?option value ...?
tcltest::customMatch mode command
tcltest::testConstraint constraint ?value?
tcltest::outputChannel ?channelID?
tcltest::errorChannel ?channelID?
tcltest::interpreter ?interp?
tcltest::debug ?level?
tcltest::errorFile ?filename?
tcltest::limitConstraints ?boolean?
tcltest::loadFile ?filename?
tcltest::loadScript ?script?
tcltest::match ?patternList?
tcltest::matchDirectories ?patternList?
tcltest::matchFiles ?patternList?
tcltest::outputFile ?filename?
tcltest::preserveCore ?level?
tcltest::singleProcess ?boolean?
tcltest::skip ?patternList?
tcltest::skipDirectories ?patternList?
tcltest::skipFiles ?patternList?
tcltest::temporaryDirectory ?directory?
tcltest::testsDirectory ?directory?
tcltest::verbose ?level?
tcltest::test name description optionList
tcltest::bytestring string
tcltest::normalizeMsg msg
tcltest::normalizePath pathVar
tcltest::workingDirectory ?dir?
_________________________________________________________________
DESCRIPTION
The tcltest package provides several utility commands useful in the
construction of test suites for code instrumented to be run by evalua-
tion of Tcl commands. Notably the built-in commands of the Tcl library
itself are tested by a test suite using the tcltest package.
All the commands provided by the tcltest package are defined in and
exported from the ::tcltest namespace, as indicated in the SYNOPSIS
above. In the following sections, all commands will be described by
their simple names, in the interest of brevity.
The central command of tcltest is [test] that defines and runs a test.
Testing with [test] involves evaluation of a Tcl script and comparing
the result to an expected result, as configured and controlled by a
number of options. Several other commands provided by tcltest govern
the configuration of [test] and the collection of many [test] commands
into test suites.
See CREATING TEST SUITES WITH TCLTEST below for an extended example of
how to use the commands of tcltest to produce test suites for your Tcl-
enabled code.
COMMANDS
test name description ?option value ...?
Defines and possibly runs a test with the name name and descrip-
tion description. The name and description of a test are used
in messages reported by [test] during the test, as configured by
the options of tcltest. The remaining option value arguments to
[test] define the test, including the scripts to run, the condi-
tions under which to run them, the expected result, and the
means by which the expected and actual results should be com-
pared. See TESTS below for a complete description of the valid
options and how they define a test. The [test] command returns
an empty string.
test name description ?constraints? body result
This form of [test] is provided to support test suites written
for version 1 of the tcltest package, and also a simpler inter-
face for a common usage. It is the same as [test name descrip-
tion -constraints constraints -body body -result result]. All
other options to [test] take their default values. When con-
straints is omitted, this form of [test] can be distinguished
from the first because all options begin with ``-''.
loadTestedCommands
Evaluates in the caller's context the script specified by [con-
figure -load] or [configure -loadfile]. Returns the result of
that script evaluation, including any error raised by the
script. Use this command and the related configuration options
to provide the commands to be tested to the interpreter running
the test suite.
makeFile contents name ?directory?
Creates a file named name relative to directory directory and
write contents to that file using the encoding [encoding sys-
tem]. If contents does not end with a newline, a newline will
be appended so that the file named name does end with a newline.
Because the system encoding is used, this command is only suit-
able for making text files. The file will be removed by the
next evaluation of [cleanupTests], unless it is removed by
[removeFile] first. The default value of directory is the
directory [configure -tmpdir]. Returns the full path of the
file created. Use this command to create any text file required
by a test with contents as needed.
removeFile name ?directory?
Forces the file referenced by name to be removed. This file
name should be relative to directory. The default value of
directory is the directory [configure -tmpdir]. Returns an
empty string. Use this command to delete files created by
[makeFile].
makeDirectory name ?directory?
Creates a directory named name relative to directory directory.
The directory will be removed by the next evaluation of
[cleanupTests], unless it is removed by [removeDirectory] first.
The default value of directory is the directory [configure
-tmpdir]. Returns the full path of the directory created. Use
this command to create any directories that are required to
exist by a test.
removeDirectory name ?directory?
Forces the directory referenced by name to be removed. This
directory should be relative to directory. The default value of
directory is the directory [configure -tmpdir]. Returns an
empty string. Use this command to delete any directories cre-
ated by [makeDirectory].
viewFile file ?directory?
Returns the contents of file, except for any final newline, just
as [read -nonewline] would return. This file name should be
relative to directory. The default value of directory is the
directory [configure -tmpdir]. Use this command as a convenient
way to turn the contents of a file generated by a test into the
result of that test for matching against an expected result.
The contents of the file are read using the system encoding, so
its usefulness is limited to text files.
cleanupTests
Intended to clean up and summarize after several tests have been
run. Typically called once per test file, at the end of the
file after all tests have been completed. For best effective-
ness, be sure that the [cleanupTests] is evaluated even if an
error occurs earlier in the test file evaluation.
Prints statistics about the tests run and removes files that
were created by [makeDirectory] and [makeFile] since the last
[cleanupTests]. Names of files and directories in the directory
[configure -tmpdir] created since the last [cleanupTests], but
not created by [makeFile] or [makeDirectory] are printed to
[outputChannel]. This command also restores the original shell
environment, as described by the ::env array. Returns an empty
string.
runAllTests
This is a master command meant to run an entire suite of tests,
spanning multiple files and/or directories, as governed by the
configurable options of tcltest. See RUNNING ALL TESTS below
for a complete description of the many variations possible with
[runAllTests].
CONFIGURATION COMMANDS
configure
Returns the list of configurable options supported by tcltest.
See CONFIGURABLE OPTIONS below for the full list of options,
their valid values, and their effect on tcltest operations.
configure option
Returns the current value of the supported configurable option
option. Raises an error if option is not a supported config-
urable option.
configure option value ?option value ...?
Sets the value of each configurable option option to the corre-
sponding value value, in order. Raises an error if an option is
not a supported configurable option, or if value is not a valid
value for the corresponding option, or if a value is not pro-
vided. When an error is raised, the operation of [configure] is
halted, and subsequent option value arguments are not processed.
If the environment variable ::env(TCLTEST_OPTIONS) exists when
the tcltest package is loaded (by [package require tcltest])
then its value is taken as a list of arguments to pass to [con-
figure]. This allows the default values of the configuration
options to be set by the environment.
customMatch mode script
Registers mode as a new legal value of the -match option to
[test]. When the -match mode option is passed to [test], the
script script will be evaluated to compare the actual result of
evaluating the body of the test to the expected result. To per-
form the match, the script is completed with two additional
words, the expected result, and the actual result, and the com-
pleted script is evaluated in the global namespace. The com-
pleted script is expected to return a boolean value indicating
whether or not the results match. The built-in matching modes
of [test] are exact, glob, and regexp.
testConstraint constraint ?boolean?
Sets or returns the boolean value associated with the named con-
straint. See TEST CONSTRAINTS below for more information.
interpreter ?executableName?
Sets or returns the name of the executable to be [exec]ed by
[runAllTests] to run each test file when [configure -singleproc]
is false. The default value for [interpreter] is the name of
the currently running program as returned by [info nameofexe-
cutable].
outputChannel ?channelID?
Sets or returns the output channel ID. This defaults to stdout.
Any test that prints test related output should send that output
to [outputChannel] rather than letting that output default to
stdout.
errorChannel ?channelID?
Sets or returns the error channel ID. This defaults to stderr.
Any test that prints error messages should send that output to
[errorChannel] rather than printing directly to stderr.
SHORTCUT COMMANDS
debug ?level?
Same as [configure -debug ?level?].
errorFile ?filename?
Same as [configure -errfile ?filename?].
limitConstraints ?boolean?
Same as [configure -limitconstraints ?boolean?].
loadFile ?filename?
Same as [configure -loadfile ?filename?].
loadScript ?script?
Same as [configure -load ?script?].
match ?patternList?
Same as [configure -match ?patternList?].
matchDirectories ?patternList?
Same as [configure -relateddir ?patternList?].
matchFiles ?patternList?
Same as [configure -file ?patternList?].
outputFile ?filename?
Same as [configure -outfile ?filename?].
preserveCore ?level?
Same as [configure -preservecore ?level?].
singleProcess ?boolean?
Same as [configure -singleproc ?boolean?].
skip ?patternList?
Same as [configure -skip ?patternList?].
skipDirectories ?patternList?
Same as [configure -asidefromdir ?patternList?].
skipFiles ?patternList?
Same as [configure -notfile ?patternList?].
temporaryDirectory ?directory?
Same as [configure -tmpdir ?directory?].
testsDirectory ?directory?
Same as [configure -testdir ?directory?].
verbose ?level?
Same as [configure -verbose ?level?].
OTHER COMMANDS
The remaining commands provided by tcltest have better alternatives
provided by tcltest or Tcl itself. They are retained to support exist-
ing test suites, but should be avoided in new code.
test name description optionList
This form of [test] was provided to enable passing many options
spanning several lines to [test] as a single argument quoted by
braces, rather than needing to backslash quote the newlines
between arguments to [test]. The optionList argument is
expected to be a list with an even number of elements represent-
ing option and value arguments to pass to [test]. However,
these values are not passed directly, as in the alternate forms
of [switch]. Instead, this form makes an unfortunate attempt to
overthrow Tcl's substitution rules by performing substitutions
on some of the list elements as an attempt to implement a ``do
what I mean'' interpretation of a brace-enclosed ``block''. The
result is nearly impossible to document clearly, and for that
reason this form is not recommended. See the examples in CREAT-
ING TEST SUITES WITH TCLTEST below to see that this form is
really not necessary to avoid backslash-quoted newlines. If you
insist on using this form, examine the source code of tcltest if
you want to know the substitution details, or just enclose the
third through last argument to [test] in braces and hope for the
best.
workingDirectory ?directoryName?
Sets or returns the current working directory when the test
suite is running. The default value for workingDirectory is the
directory in which the test suite was launched. The Tcl com-
mands [cd] and [pwd] are sufficient replacements.
normalizeMsg msg
Returns the result of removing the ``extra'' newlines from msg,
where ``extra'' is rather imprecise. Tcl offers plenty of
string processing commands to modify strings as you wish, and
[customMatch] allows flexible matching of actual and expected
results.
normalizePath pathVar
Resolves symlinks in a path, thus creating a path without inter-
nal redirection. It is assumed that pathVar is absolute. path-
Var is modified in place. The Tcl command [file normalize] is a
sufficient replacement.
bytestring string
Construct a string that consists of the requested sequence of
bytes, as opposed to a string of properly formed UTF-8 charac-
ters using the value supplied in string. This allows the tester
to create denormalized or improperly formed strings to pass to C
procedures that are supposed to accept strings with embedded
NULL types and confirm that a string result has a certain pat-
tern of bytes. This is exactly equivalent to the Tcl command
[encoding convertfrom identity].
TESTS
The [test] command is the heart of the tcltest package. Its essential
function is to evaluate a Tcl script and compare the result with an
expected result. The options of [test] define the test script, the
environment in which to evaluate it, the expected result, and how the
compare the actual result to the expected result. Some configuration
options of tcltest also influence how [test] operates.
The valid options for [test] are summarized:
test name description
?-constraints keywordList|expression?
?-setup setupScript?
?-body testScript?
?-cleanup cleanupScript?
?-result expectedAnswer?
?-output expectedOutput?
?-errorOutput expectedError?
?-returnCodes codeList?
?-match mode?
The name may be any string. It is conventional to choose a name
according to the pattern:
target-majorNum.minorNum
For white-box (regression) tests, the target should be the name of the
C function or Tcl procedure being tested. For black-box tests, the
target should be the name of the feature being tested. Some conven-
tions call for the names of black-box tests to have the suffix _bb.
Related tests should share a major number. As a test suite evolves, it
is best to have the same test name continue to correspond to the same
test, so that it remains meaningful to say things like ``Test foo-1.3
passed in all releases up to 3.4, but began failing in release 3.5.''
During evaluation of [test], the name will be compared to the lists of
string matching patterns returned by [configure -match], and [configure
-skip]. The test will be run only if name matches any of the patterns
from [configure -match] and matches none of the patterns from [config-
ure -skip].
The description should be a short textual description of the test. The
description is included in output produced by the test, typically test
failure messages. Good description values should briefly explain the
purpose of the test to users of a test suite. The name of a Tcl or C
function being tested should be included in the description for regres-
sion tests. If the test case exists to reproduce a bug, include the
bug ID in the description.
Valid attributes and associated values are:
-constraints keywordList|expression
The optional -constraints attribute can be list of one or more
keywords or an expression. If the -constraints value is a list
of keywords, each of these keywords should be the name of a con-
straint defined by a call to [testConstraint]. If any of the
listed constraints is false or does not exist, the test is
skipped. If the -constraints value is an expression, that
expression is evaluated. If the expression evaluates to true,
then the test is run. Note that the expression form of -con-
straints may interfere with the operation of [configure -con-
straints] and [configure -limitconstraints], and is not recom-
mended. Appropriate constraints should be added to any tests
that should not always be run. That is, conditional evaluation
of a test should be accomplished by the -constraints option, not
by conditional evaluation of [test]. In that way, the same num-
ber of tests are always reported by the test suite, though the
number skipped may change based on the testing environment. The
default value is an empty list. See TEST CONSTRAINTS below for
a list of built-in constraints and information on how to add
your own constraints.
-setup script
The optional -setup attribute indicates a script that will be
run before the script indicated by the -body attribute. If
evaluation of script raises an error, the test will fail. The
default value is an empty script.
-body script
The -body attribute indicates the script to run to carry out the
test. It must return a result that can be checked for correct-
ness. If evaluation of script raises an error, the test will
fail. The default value is an empty script.
-cleanup script
The optional -cleanup attribute indicates a script that will be
run after the script indicated by the -body attribute. If eval-
uation of script raises an error, the test will fail. The
default value is an empty script.
-match mode
The -match attribute determines how expected answers supplied by
-result, -output, and -errorOutput are compared. Valid values
for mode are regexp, glob, exact, and any value registered by a
prior call to [customMatch]. The default value is exact.
-result expectedValue
The -result attribute supplies the expectedValue against which
the return value from script will be compared. The default value
is an empty string.
-output expectedValue
The -output attribute supplies the expectedValue against which
any output sent to stdout or [outputChannel] during evaluation
of the script(s) will be compared. Note that only output
printed using [::puts] is used for comparison. If -output is
not specified, output sent to stdout and [outputChannel] is not
processed for comparison.
-errorOutput expectedValue
The -errorOutput attribute supplies the expectedValue against
which any output sent to stderr or [errorChannel] during evalua-
tion of the script(s) will be compared. Note that only output
printed using [::puts] is used for comparison. If -errorOutput
is not specified, output sent to stderr and [errorChannel] is
not processed for comparison.
-returnCodes expectedCodeList
The optional -returnCodes attribute supplies expectedCodeList, a
list of return codes that may be accepted from evaluation of the
-body script. If evaluation of the -body script returns a code
not in the expectedCodeList, the test fails. All return codes
known to [return], in both numeric and symbolic form, including
extended return codes, are acceptable elements in the expected-
CodeList. Default value is {ok return}.
To pass, a test must successfully evaluate its -setup, -body, and
-cleanup scripts. The return code of the -body script and its result
must match expected values, and if specified, output and error data
from the test must match expected -output and -errorOutput values. If
any of these conditions are not met, then the test fails. Note that
all scripts are evaluated in the context of the caller of [test].
As long as [test] is called with valid syntax and legal values for all
attributes, it will not raise an error. Test failures are instead
reported as output written to [outputChannel]. In default operation, a
successful test produces no output. The output messages produced by
[test] are controlled by the [configure -verbose] option as described
in CONFIGURABLE OPTIONS below. Any output produced by the test scripts
themselves should be produced using [::puts] to [outputChannel] or
[errorChannel], so that users of the test suite may easily capture out-
put with the [configure -outfile] and [configure -errfile] options, and
so that the -output and -errorOutput attributes work properly.
TEST CONSTRAINTS
Constraints are used to determine whether or not a test should be
skipped. Each constraint has a name, which may be any string, and a
boolean value. Each [test] has a -constraints value which is a list of
constraint names. There are two modes of constraint control. Most
frequently, the default mode is used, indicated by a setting of [con-
figure -limitconstraints] to false. The test will run only if all con-
straints in the list are true-valued. Thus, the -constraints option of
[test] is a convenient, symbolic way to define any conditions required
for the test to be possible or meaningful. For example, a [test] with
-constraints unix will only be run if the constraint unix is true,
which indicates the test suite is being run on a Unix platform.
Each [test] should include whatever -constraints are required to con-
strain it to run only where appropriate. Several constraints are pre-
defined in the tcltest package, listed below. The registration of
user-defined constraints is performed by the [testConstraint] command.
User-defined constraints may appear within a test file, or within the
script specified by the [configure -load] or [configure -loadfile]
options.
The following is a list of constraints pre-defined by the tcltest pack-
age itself:
singleTestInterp
test can only be run if all test files are sourced into a single
interpreter
unix test can only be run on any Unix platform
win test can only be run on any Windows platform
nt test can only be run on any Windows NT platform
95 test can only be run on any Windows 95 platform
98 test can only be run on any Windows 98 platform
mac test can only be run on any Mac platform
unixOrWin
test can only be run on a Unix or Windows platform
macOrWin
test can only be run on a Mac or Windows platform
macOrUnix
test can only be run on a Mac or Unix platform
tempNotWin
test can not be run on Windows. This flag is used to temporar-
ily disable a test.
tempNotMac
test can not be run on a Mac. This flag is used to temporarily
disable a test.
unixCrash
test crashes if it's run on Unix. This flag is used to tempo-
rarily disable a test.
winCrash
test crashes if it's run on Windows. This flag is used to tem-
porarily disable a test.
macCrash
test crashes if it's run on a Mac. This flag is used to tempo-
rarily disable a test.
emptyTest
test is empty, and so not worth running, but it remains as a
place-holder for a test to be written in the future. This con-
straint has value false to cause tests to be skipped unless the
user specifies otherwise.
knownBug
test is known to fail and the bug is not yet fixed. This con-
straint has value false to cause tests to be skipped unless the
user specifies otherwise.
nonPortable
test can only be run in some known development environment.
Some tests are inherently non-portable because they depend on
things like word length, file system configuration, window man-
ager, etc. This constraint has value false to cause tests to be
skipped unless the user specifies otherwise.
userInteraction
test requires interaction from the user. This constraint has
value false to causes tests to be skipped unless the user speci-
fies otherwise.
interactive
test can only be run in if the interpreter is in interactive
mode (when the global tcl_interactive variable is set to 1).
nonBlockFiles
test can only be run if platform supports setting files into
nonblocking mode
asyncPipeClose
test can only be run if platform supports async flush and async
close on a pipe
unixExecs
test can only be run if this machine has Unix-style commands
cat, echo, sh, wc, rm, sleep, fgrep, ps, chmod, and mkdir avail-
able
hasIsoLocale
test can only be run if can switch to an ISO locale
root test can only run if Unix user is root
notRoot
test can only run if Unix user is not root
eformat
test can only run if app has a working version of sprintf with
respect to the "e" format of floating-point numbers.
stdio test can only be run if [interpreter] can be [open]ed as a pipe.
The alternative mode of constraint control is enabled by setting [con-
figure -limitconstraints] to true. With that configuration setting,
all existing constraints other than those in the constraint list
returned by [configure -constraints] are set to false. When the value
of [configure -constraints] is set, all those constraints are set to
true. The effect is that when both options [configure -constraints]
and [configure -limitconstraints] are in use, only those tests includ-
ing only constraints from the [configure -constraints] list are run;
all others are skipped. For example, one might set up a configuration
with
configure -constraints knownBug \
-limitconstraints true \
-verbose pass
to run exactly those tests that exercise known bugs, and discover
whether any of them pass, indicating the bug had been fixed.
RUNNING ALL TESTS
The single command [runAllTests] is evaluated to run an entire test
suite, spanning many files and directories. The configuration options
of tcltest control the precise operations. The [runAllTests] command
begins by printing a summary of its configuration to [outputChannel].
Test files to be evaluated are sought in the directory [configure
-testdir]. The list of files in that directory that match any of the
patterns in [configure -file] and match none of the patterns in [con-
figure -notfile] is generated and sorted. Then each file will be eval-
uated in turn. If [configure -singleproc] is true, then each file will
be [source]d in the caller's context. If it is false, then a copy of
[interpreter] will be [exec]d to evaluate each file. The multi-process
operation is useful when testing can cause errors so severe that a
process terminates. Although such an error may terminate a child
process evaluating one file, the master process can continue with the
rest of the test suite. In multi-process operation, the configuration
of tcltest in the master process is passed to the child processes as
command line arguments, with the exception of [configure -outfile].
The [runAllTests] command in the master process collects all output
from the child processes and collates their results into one master
report. Any reports of individual test failures, or messages requested
by a [configure -verbose] setting are passed directly on to [out-
putChannel] by the master process.
After evaluating all selected test files, a summary of the results is
printed to [outputChannel]. The summary includes the total number of
[test]s evaluated, broken down into those skipped, those passed, and
those failed. The summary also notes the number of files evaluated,
and the names of any files with failing tests or errors. A list of the
constraints that caused tests to be skipped, and the number of tests
skipped for each is also printed. Also, messages are printed if it
appears that evaluation of a test file has caused any temporary files
to be left behind in [configure -tmpdir].
Having completed and summarized all selected test files, [runAllTests]
then recursively acts on subdirectories of [configure -testdir]. All
subdirectories that match any of the patterns in [configure -related-
dir] and do not match any of the patterns in [configure -asidefromdir]
are examined. If a file named all.tcl is found in such a directory, it
will be [source]d in the caller's context. Whether or not an examined
directory contains an all.tcl file, its subdirectories are also scanned
against the [configure -relateddir] and [configure -asidefromdir] pat-
terns. In this way, many directories in a directory tree can have all
their test files evaluated by a single [runAllTests] command.
CONFIGURABLE OPTIONS
The [configure] command is used to set and query the configurable
options of tcltest. The valid options are:
-singleproc boolean
Controls whether or not [runAllTests] spawns a child process for
each test file. No spawning when boolean is true. Default
value is false.
-debug level
Sets the debug level to level, an integer value indicating how
much debugging information should be printed to stdout. Note
that debug messages always go to stdout, independent of the
value of [configure -outfile]. Default value is 0. Levels are
defined as:
0 Do not display any debug information.
1 Display information regarding whether a test is skipped
because it doesn't match any of the tests that were spec-
ified using by [configure -match] (userSpecifiedNonMatch)
or matches any of the tests specified by [configure
-skip] (userSpecifiedSkip). Also print warnings about
possible lack of cleanup or balance in test files. Also
print warnings about any re-use of test names.
2 Display the flag array parsed by the command line proces-
sor, the contents of the ::env array, and all user-
defined variables that exist in the current namespace as
they are used.
3 Display information regarding what individual procs in
the test harness are doing.
-verbose level
Sets the type of output verbosity desired to level, a list of
zero or more of the elements body, pass, skip, start, and error.
Default value is {body error}. Levels are defined as:
body (b)
Display the body of failed tests
pass (p)
Print output when a test passes
skip (s)
Print output when a test is skipped
start (t)
Print output whenever a test starts
error (e)
Print errorInfo and errorCode, if they exist, when a test
return code does not match its expected return code
The single letter abbreviations noted above are also recognized so that
[configure -verbose pt] is the same as [configure -verbose {pass
start}].
-preservecore level
Sets the core preservation level to level. This level deter-
mines how stringent checks for core files are. Default value is
0. Levels are defined as:
0 No checking - do not check for core files at the end of
each test command, but do check for them in [runAllTests]
after all test files have been evaluated.
1 Also check for core files at the end of each [test] com-
mand.
2 Check for core files at all times described above, and
save a copy of each core file produced in [configure
-tmpdir].
-limitconstraints boolean
Sets the mode by which [test] honors constraints as described in
TESTS above. Default value is false.
-constraints list
Sets all the constraints in list to true. Also used in combina-
tion with [configure -limitconstraints true] to control an
alternative constraint mode as described in TESTS above.
Default value is an empty list.
-tmpdir directory
Sets the temporary directory to be used by [makeFile], [makeDi-
rectory], [viewFile], [removeFile], and [removeDirectory] as the
default directory where temporary files and directories created
by test files should be created. Default value is [workingDi-
rectory].
-testdir directory
Sets the directory searched by [runAllTests] for test files and
subdirectories. Default value is [workingDirectory].
-file patternList
Sets the list of patterns used by [runAllTests] to determine
what test files to evaluate. Default value is *.test.
-notfile patternList
Sets the list of patterns used by [runAllTests] to determine
what test files to skip. Default value is l.*.test, so that any
SCCS lock files are skipped.
-relateddir patternList
Sets the list of patterns used by [runAllTests] to determine
what subdirectories to search for an all.tcl file. Default
value is *.
-asidefromdir patternList
Sets the list of patterns used by [runAllTests] to determine
what subdirectories to skip when searching for an all.tcl file.
Default value is an empty list.
-match patternList
Set the list of patterns used by [test] to determine whether a
test should be run. Default value is *.
-skip patternList
Set the list of patterns used by [test] to determine whether a
test should be skipped. Default value is an empty list.
-load script
Sets a script to be evaluated by [loadTestedCommands]. Default
value is an empty script.
-loadfile filename
Sets the filename from which to read a script to be evaluated by
[loadTestedCommands]. This is an alternative to -load. They
cannot be used together.
-outfile filename
Sets the file to which all output produced by tcltest should be
written. A file named filename will be [open]ed for writing,
and the resulting channel will be set as the value of [out-
putChannel].
-errfile filename
Sets the file to which all error output produced by tcltest
should be written. A file named filename will be [open]ed for
writing, and the resulting channel will be set as the value of
[errorChannel].
CREATING TEST SUITES WITH TCLTEST
The fundamental element of a test suite is the individual [test] com-
mand. We begin with several examples.
[1] Test of a script that returns normally.
test example-1.0 {normal return} {
format %s value
} value
[2] Test of a script that requires context setup and cleanup. Note
the bracing and indenting style that avoids any need for line
continuation.
test example-1.1 {test file existence} -setup {
set file [makeFile {} test]
} -body {
file exists $file
} -cleanup {
removeFile test
} -result 1
[3] Test of a script that raises an error.
test example-1.2 {error return} -body {
error message
} -returnCodes error -result message
[4] Test with a constraint.
test example-1.3 {user owns created files} -constraints {
unix
} -setup {
set file [makeFile {} test]
} -body {
file attributes $file -owner
} -cleanup {
removeFile test
} -result $::tcl_platform(user)
At the next higher layer of organization, several [test] commands are
gathered together into a single test file. Test files should have
names with the .test extension, because that is the default pattern
used by [runAllTests] to find test files. It is a good rule of thumb
to have one test file for each source code file of your project. It is
good practice to edit the test file and the source code file together,
keeping tests synchronized with code changes.
Most of the code in the test file should be the [test] commands. Use
constraints to skip tests, rather than conditional evaluation of
[test]. That is, do this:
[5]
testConstraint X [expr $myRequirement]
test goodConditionalTest {} X {
# body
} result
and do not do this:
[6]
if $myRequirement {
test badConditionalTest {} {
#body
} result
}
Use the -setup and -cleanup options to establish and release all con-
text requirements of the test body. Do not make tests depend on prior
tests in the file. Those prior tests might be skipped. If several
consecutive tests require the same context, the appropriate setup and
cleanup scripts may be stored in variable for passing to each tests
-setup and -cleanup options. This is a better solution than performing
setup outside of [test] commands, because the setup will only be done
if necessary, and any errors during setup will be reported, and not
cause the test file to abort.
A test file should be able to be combined with other test files and not
interfere with them, even when [configure -singleproc 1] causes all
files to be evaluated in a common interpreter. A simple way to achieve
this is to have your tests define all their commands and variables in a
namespace that is deleted when the test file evaluation is complete. A
good namespace to use is a child namespace test of the namespace of the
module you are testing.
A test file should also be able to be evaluated directly as a script,
not depending on being called by a master [runAllTests]. This means
that each test file should process command line arguments to give the
tester all the configuration control that tcltest provides.
After all [test]s in a test file, the command [cleanupTests] should be
called.
[7] Here is a sketch of a sample test file illustrating those
points:
package require tcltest 2.2
eval ::tcltest::configure $argv
package require example
namespace eval ::example::test {
namespace import ::tcltest::*
testConstraint X [expr {...}]
variable SETUP {#common setup code}
variable CLEANUP {#common cleanup code}
test example-1 {} -setup $SETUP -body {
# First test
} -cleanup $CLEANUP -result {...}
test example-2 {} -constraints X -setup $SETUP -body {
# Second test; constrained
} -cleanup $CLEANUP -result {...}
test example-3 {} {
# Third test; no context required
} {...}
cleanupTests
}
namespace delete ::example::test
The next level of organization is a full test suite, made up of several
test files. One script is used to control the entire suite. The basic
function of this script is to call [runAllTests] after doing any neces-
sary setup. This script is usually named all.tcl because that's the
default name used by [runAllTests] when combining multiple test suites
into one testing run.
[8] Here is a sketch of a sample test suite master script:
package require Tcl 8.4
package require tcltest 2.2
package require example
::tcltest::configure -testdir [file dirname [file normalize [info script]]]
eval ::tcltest::configure $argv
::tcltest::runAllTests
COMPATIBILITY
A number of commands and variables in the ::tcltest namespace provided
by earlier releases of tcltest have not been documented here. They are
no longer part of the supported public interface of tcltest and should
not be used in new test suites. However, to continue to support exist-
ing test suites written to the older interface specifications, many of
those deprecated commands and variables still work as before. For
example, in many circumstances, [configure] will be automatically
called shortly after [package require tcltest 2.1] succeeds with argu-
ments from the variable ::argv. This is to support test suites that
depend on the old behavior that tcltest was automatically configured
from command line arguments. New test files should not depend on this,
but should explicitly include
eval ::tcltest::configure $::argv
to establish a configuration from command line arguments.
KNOWN ISSUES
There are two known issues related to nested evaluations of [test].
The first issue relates to the stack level in which test scripts are
executed. Tests nested within other tests may be executed at the same
stack level as the outermost test. For example, in the following code:
test level-1.1 {level 1} {
-body {
test level-2.1 {level 2} {
}
}
}
any script executed in level-2.1 may be executed at the same stack
level as the script defined for level-1.1.
In addition, while two [test]s have been run, results will only be
reported by [cleanupTests] for tests at the same level as test
level-1.1. However, test results for all tests run prior to level-1.1
will be available when test level-2.1 runs. What this means is that if
you try to access the test results for test level-2.1, it will may say
that 'm' tests have run, 'n' tests have been skipped, 'o' tests have
passed and 'p' tests have failed, where 'm', 'n', 'o', and 'p' refer to
tests that were run at the same test level as test level-1.1.
Implementation of output and error comparison in the test command
depends on usage of ::puts in your application code. Output is inter-
cepted by redefining the ::puts command while the defined test script
is being run. Errors thrown by C procedures or printed directly from C
applications will not be caught by the test command. Therefore, usage
of the -output and -errorOutput options to [test] is useful only for
pure Tcl applications that use [::puts] to produce output.
KEYWORDS
test, test harness, test suite
tcltest 2.2 tcltest(n)
Man(1) output converted with
man2html