/usr/gnu/man/cat.n/string.n.Z(/usr/gnu/man/cat.n/string.n.Z)
______________________________________________________________________________
NAME
string - Manipulate strings
SYNOPSIS
string option arg ?arg ...?
_________________________________________________________________
DESCRIPTION
Performs one of several string operations, depending on option. The
legal options (which may be abbreviated) are:
string bytelength string
Returns a decimal string giving the number of bytes used to rep-
resent string in memory. Because UTF-8 uses one to three bytes
to represent Unicode characters, the byte length will not be the
same as the character length in general. The cases where a
script cares about the byte length are rare. In almost all
cases, you should use the string length operation (including
determining the length of a Tcl ByteArray object). Refer to the
Tcl_NumUtfChars manual entry for more details on the UTF-8 rep-
resentation.
string compare ?-nocase? ?-length int? string1 string2
Perform a character-by-character comparison of strings string1
and string2. Returns -1, 0, or 1, depending on whether string1
is lexicographically less than, equal to, or greater than
string2. If -length is specified, then only the first length
characters are used in the comparison. If -length is negative,
it is ignored. If -nocase is specified, then the strings are
compared in a case-insensitive manner.
string equal ?-nocase? ?-length int? string1 string2
Perform a character-by-character comparison of strings string1
and string2. Returns 1 if string1 and string2 are identical, or
0 when not. If -length is specified, then only the first length
characters are used in the comparison. If -length is negative,
it is ignored. If -nocase is specified, then the strings are
compared in a case-insensitive manner.
string first string1 string2 ?startIndex?
Search string2 for a sequence of characters that exactly match
the characters in string1. If found, return the index of the
first character in the first such match within string2. If not
found, return -1. If startIndex is specified (in any of the
forms accepted by the index method), then the search is con-
strained to start with the character in string2 specified by the
index. For example,
string first a 0a23456789abcdef 5
will return 10, but
string first a 0123456789abcdef 11
will return -1.
string index string charIndex
Returns the charIndex'th character of the string argument. A
charIndex of 0 corresponds to the first character of the string.
charIndex may be specified as follows:
integer The char specified at this integral index.
end The last char of the string.
end-integer
The last char of the string minus the specified inte-
ger offset (e.g. end-1 would refer to the "c" in
"abcd").
If charIndex is less than 0 or greater than or equal to the
length of the string then an empty string is returned.
string is class ?-strict? ?-failindex varname? string
Returns 1 if string is a valid member of the specified character
class, otherwise returns 0. If -strict is specified, then an
empty string returns 0, otherwise and empty string will return 1
on any class. If -failindex is specified, then if the function
returns 0, the index in the string where the class was no longer
valid will be stored in the variable named varname. The varname
will not be set if the function returns 1. The following char-
acter classes are recognized (the class name can be abbrevi-
ated):
alnum Any Unicode alphabet or digit character.
alpha Any Unicode alphabet character.
ascii Any character with a value less than \u0080 (those
that are in the 7-bit ascii range).
boolean Any of the forms allowed to Tcl_GetBoolean.
control Any Unicode control character.
digit Any Unicode digit character. Note that this
includes characters outside of the [0-9] range.
double Any of the valid forms for a double in Tcl, with
optional surrounding whitespace. In case of
under/overflow in the value, 0 is returned and the
varname will contain -1.
false Any of the forms allowed to Tcl_GetBoolean where the
value is false.
graph Any Unicode printing character, except space.
integer Any of the valid forms for an ordinary integer in
Tcl, with optional surrounding whitespace. In case
of under/overflow in the value, 0 is returned and
the varname will contain -1.
lower Any Unicode lower case alphabet character.
print Any Unicode printing character, including space.
punct Any Unicode punctuation character.
space Any Unicode space character.
true Any of the forms allowed to Tcl_GetBoolean where the
value is true.
upper Any upper case alphabet character in the Unicode
character set.
wordchar Any Unicode word character. That is any alphanu-
meric character, and any Unicode connector punctua-
tion characters (e.g. underscore).
xdigit Any hexadecimal digit character ([0-9A-Fa-f]).
In the case of boolean, true and false, if the function will
return 0, then the varname will always be set to 0, due to the
varied nature of a valid boolean value.
string last string1 string2 ?lastIndex?
Search string2 for a sequence of characters that exactly match
the characters in string1. If found, return the index of the
first character in the last such match within string2. If there
is no match, then return -1. If lastIndex is specified (in any
of the forms accepted by the index method), then only the char-
acters in string2 at or before the specified lastIndex will be
considered by the search. For example,
string last a 0a23456789abcdef 15
will return 10, but
string last a 0a23456789abcdef 9
will return 1.
string length string
Returns a decimal string giving the number of characters in
string. Note that this is not necessarily the same as the num-
ber of bytes used to store the string. If the object is a
ByteArray object (such as those returned from reading a binary
encoded channel), then this will return the actual byte length
of the object.
string map ?-nocase? mapping string
Replaces substrings in string based on the key-value pairs in
mapping. mapping is a list of key value key value ... as in
the form returned by array get. Each instance of a key in the
string will be replaced with its corresponding value. If
-nocase is specified, then matching is done without regard to
case differences. Both key and value may be multiple characters.
Replacement is done in an ordered manner, so the key appearing
first in the list will be checked first, and so on. string is
only iterated over once, so earlier key replacements will have
no affect for later key matches. For example,
string map {abc 1 ab 2 a 3 1 0} 1abcaababcabababc
will return the string 01321221.
Note that if an earlier key is a prefix of a later one, it will
completely mask the later one. So if the previous example is
reordered like this,
string map {1 0 ab 2 a 3 abc 1} 1abcaababcabababc
it will return the string 02c322c222c.
string match ?-nocase? pattern string
See if pattern matches string; return 1 if it does, 0 if it
doesn't. If -nocase is specified, then the pattern attempts to
match against the string in a case insensitive manner. For the
two strings to match, their contents must be identical except
that the following special sequences may appear in pattern:
* Matches any sequence of characters in string, includ-
ing a null string.
? Matches any single character in string.
[chars] Matches any character in the set given by chars. If a
sequence of the form x-y appears in chars, then any
character between x and y, inclusive, will match.
When used with -nocase, the end points of the range
are converted to lower case first. Whereas {[A-z]}
matches '_' when matching case-sensitively ('_' falls
between the 'Z' and 'a'), with -nocase this is consid-
ered like {[A-Za-z]} (and probably what was meant in
the first place).
\x Matches the single character x. This provides a way
of avoiding the special interpretation of the charac-
ters *?[]\ in pattern.
string range string first last
Returns a range of consecutive characters from string, starting
with the character whose index is first and ending with the
character whose index is last. An index of 0 refers to the first
character of the string. first and last may be specified as for
the index method. If first is less than zero then it is treated
as if it were zero, and if last is greater than or equal to the
length of the string then it is treated as if it were end. If
first is greater than last then an empty string is returned.
string repeat string count
Returns string repeated count number of times.
string replace string first last ?newstring?
Removes a range of consecutive characters from string, starting
with the character whose index is first and ending with the
character whose index is last. An index of 0 refers to the
first character of the string. First and last may be specified
as for the index method. If newstring is specified, then it is
placed in the removed character range. If first is less than
zero then it is treated as if it were zero, and if last is
greater than or equal to the length of the string then it is
treated as if it were end. If first is greater than last or the
length of the initial string, or last is less than 0, then the
initial string is returned untouched.
string tolower string ?first? ?last?
Returns a value equal to string except that all upper (or title)
case letters have been converted to lower case. If first is
specified, it refers to the first char index in the string to
start modifying. If last is specified, it refers to the char
index in the string to stop at (inclusive). first and last may
be specified as for the index method.
string totitle string ?first? ?last?
Returns a value equal to string except that the first character
in string is converted to its Unicode title case variant (or
upper case if there is no title case variant) and the rest of
the string is converted to lower case. If first is specified,
it refers to the first char index in the string to start modify-
ing. If last is specified, it refers to the char index in the
string to stop at (inclusive). first and last may be specified
as for the index method.
string toupper string ?first? ?last?
Returns a value equal to string except that all lower (or title)
case letters have been converted to upper case. If first is
specified, it refers to the first char index in the string to
start modifying. If last is specified, it refers to the char
index in the string to stop at (inclusive). first and last may
be specified as for the index method.
string trim string ?chars?
Returns a value equal to string except that any leading or
trailing characters from the set given by chars are removed. If
chars is not specified then white space is removed (spaces,
tabs, newlines, and carriage returns).
string trimleft string ?chars?
Returns a value equal to string except that any leading charac-
ters from the set given by chars are removed. If chars is not
specified then white space is removed (spaces, tabs, newlines,
and carriage returns).
string trimright string ?chars?
Returns a value equal to string except that any trailing charac-
ters from the set given by chars are removed. If chars is not
specified then white space is removed (spaces, tabs, newlines,
and carriage returns).
string wordend string charIndex
Returns the index of the character just after the last one in
the word containing character charIndex of string. charIndex
may be specified as for the index method. A word is considered
to be any contiguous range of alphanumeric (Unicode letters or
decimal digits) or underscore (Unicode connector punctuation)
characters, or any single character other than these.
string wordstart string charIndex
Returns the index of the first character in the word containing
character charIndex of string. charIndex may be specified as
for the index method. A word is considered to be any contiguous
range of alphanumeric (Unicode letters or decimal digits) or
underscore (Unicode connector punctuation) characters, or any
single character other than these.
EXAMPLE
Test if the string in the variable string is a proper non-empty prefix
of the string foobar.
set length [string length $string]
if {$length == 0} {
set isPrefix 0
} else {
set isPrefix [string equal -length $length $string "foobar"]
}
SEE ALSO
expr(n), list(n)
KEYWORDS
case conversion, compare, index, match, pattern, string, word, equal,
ctype
Tcl 8.1 string(n)
Man(1) output converted with
man2html