DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH PRINT BOOK
 

vxintro(ADM)


vxintro - introduction to Volume Manager utilities

Synopsis

vxassist
vxconfigd
vxdctl
vxdg
vxdisk
vxedit
vxinfo
vxiod
vxmake
vxmend
vxplex
vxprint
vxrecover
vxsd
vxstat
vxtrace
vxvol

Description

The Volume Manager utilities provide a shell-level interface used by the system administrator and higher-level applications and scripts to query and manipulate objects that are managed through the VERITAS Volume Manager (VxVM®).

Glossary

Some of the terms and objects that are used with the Volume Manager are:

volume:
A virtual disk device that looks to applications and file systems like a regular disk partition device. Volumes present block and raw device interfaces that are compatible in their use with disk partition devices. However, a volume is a virtual device that can be mirrored, spanned across disk drives, moved to use different storage, and striped using administrative commands. The configuration of a volume can be changed, using the Volume Manager utilities, without causing disruption to applications or file systems that are using the volume.

plex:
A copy of a volume's logical data address space, also sometimes known as a mirror. A volume can have up to 32 plexes associated with it. Each plex is, at least conceptually, a copy of the volume that is maintained consistently in the presence of volume I/O and reconfigurations. Plexes represent the primary means of configuring storage for a volume. Plexes can have a striped, concatenated, or RAID-5 organization (layout).

disk:
Disks exist as two entities. One is the physical disk on which all data is ultimately stored and which exhibits all the behaviors of the underlying technology. The other is the Volume Manager presentation of disks which, while mapping one-to-one with the physical disks, are just presentations of units from which allocations of storage are made. As an example, a physical disk presents the image of a device with a definable geometry with a definable number of cylinders, heads etc. whereas a Volume Manager disk is simply a unit of allocation with a name and a size.

subdisk:
A region of storage allocated on a disk for use with a volume. Subdisks are associated to volumes through plexes. One or more subdisks are laid out to form plexes based on the plex layout (striped, concatenated, or RAID-5). Subdisks are defined relative to disk media records.

disk media record:
A reference to a physical disk, or possibly a disk partition. This record can be thought of as a physical disk identifier for the disk or partition. Disk media records are configuration records that provide a name (known as the disk media name or DM name) that an administrator can use to reference a particular disk, independent of its location on the system's various disk controllers. Disk media records reference particular physical disks through a disk ID, which is a unique identifier that is assigned to a disk when it is initialized for use with the Volume Manager.

Operations are provided to set or remove the disk ID stored in a disk media record. Such operations have the effect of removing or replacing disks, with any associated subdisks being removed or replaced along with the disk.

disk access record:
A configuration record that defines a pathway to a disk. The disk access records most commonly name a particular controller number, target ID, and logical unit number. The list of all disk access records stored in a system is used to find all disks attached to the system. Disk access records do not identify particular physical disks.

Disk access records are identified by their disk access names (also known as DA names).

Through the use of disk IDs, the Volume Manager allows disks to be moved between controllers, or to different locations on a controller. When a disk is moved, a different disk access record will be used when accessing the disk, although the disk media record will continue to track the actual physical disk.

On some systems, the Volume Manager will build a list of disk access records automatically, based on the list of all devices attached to the system. On these systems, it is not necessary to define disk access records explicitly. On other systems, disk access records must be defined explicitly with the vxdisk define operation. Specialty disks (such as RAM disks or floppy disks) are likely to require explicit vxdisk define operations on all systems.

disk group:
A group of disks that share a common configuration. A configuration consists of a set of records describing objects (including disks, volumes, plexes, and subdisks) that are associated with one particular disk group. Each disk group has an administrator-assigned name that can be used by the administrator to reference that disk group. Each disk group has an internally defined unique disk group ID, which is used to differentiate two disk groups with the same administrator-assigned name.

Disk groups provide a method to partition the configuration database, so that the database size is not too large and so that database modifications do not affect too many drives. They also allow the Volume Manager to operate with groups of physical disk media that can be moved between systems.

Disks and disk groups have a circular relationship: disk groups are formed from disks, and disk group configurations are stored on disks. All disks in a disk group are stamped with a disk group ID, which is a unique identifier for naming disk groups. Some or all disks in a disk group also store copies of the configuration database of the disk group.

disk group configuration:
A disk group configuration is a small database that contains all volume, plex, subdisk, and disk media records. These configurations are replicated onto some or all disks in the disk group, usually with one copy on each disk. Because these databases are stored within disk groups, record associations cannot span disk groups. Thus, a subdisk defined on a disk in one disk group cannot be associated with a volume in another disk group.

root disk group:
Each system requires one special disk group, named rootdg, which is generally the default for most utilities. In addition to defining the regular disk group information, the configuration for the root disk group (rootdg) contains local information that is specific to a disk group and that is not intended to be movable between systems.

private region:
Disks used by the Volume Manager contain two special regions: a private region and a public region. Usually, each region is formed from a complete partition of the disk; however, the private and public regions can be allocated from the same partition.

The private region of a disk contains various on-disk structures that are used by the Volume Manager for various internal purposes. Each private region begins with a disk header which identifies the disk and its disk group. Private regions can also contain copies of a disk group's configuration, and copies of the disk group's kernel log.

public region:
The public region of a disk is the space reserved for allocating subdisks. Subdisks are defined with offsets that are relative to the beginning of the public region of a particular disk. Only one contiguous region of disk can form the public region for a particular disk.

kernel log:
A log kept in the private region on the disk and that is written by the Volume Manager kernel. The log contains records describing the state of volumes in the disk group. This log provides a mechanism for the kernel to persistently register state changes so that vxconfigd can be guaranteed to detect the state changes even in the event of a system failure.

disk header:
A block stored in a private region of a disk and that defines several properties of the disk. The disk header defines the size of the private region, the location and size of the public region, the unique disk ID for the disk, the disk group ID and disk group name (if the disk is currently associated with a disk group), and the host ID for a host that has exclusive use of the disk.

disk ID:
A 64-byte universally unique identifier that is assigned to a physical disk when its private region is initialized with the vxdisk init operation. The disk ID is stored in the disk media record so that the physical disk can be related to the disk media record at system startup.

disk group ID:
A 64-byte universally unique identifier that is assigned to a disk group when the disk group is created with vxdg init. This identifier is in addition to the disk group name, which is assigned by the administrator. The disk group ID is used to check for disk groups that have the same administrator-assigned name but are actually distinct.

host ID:
A name, usually assigned by the administrator, that identifies a particular host. Host IDs are used to assign ownership to particular physical disks. When a disk is part of a disk group that is in active use by a particular host, the disk is stamped with that host's host ID. If another system attempts to access the disk, it will detect that the disk has a non-matching host ID and will disallow access until the first system discontinues use of the disk. To allow for system failures that do not clear the host ID, the vxdisk clearimport operation can be used to clear the host ID stored on a disk.

If a disk is a member of a disk group and has a host ID that matches a particular host, then that host will import the disk group as part of system startup.

striped plex:
A plex that scatters data evenly across each of its associated subdisks. A plex has a characteristic number of stripe columns (consisting of associated subdisks) and a characteristic stripe unit size. The stripe unit size defines how data with a particular address is allocated to one of the associated subdisks. Given a stripe unit size of 128 blocks, and two stripe columns, the first group of 128 blocks would be allocated to the first subdisk, the second group of 128 blocks would be allocated to the second subdisk, the third group to the first subdisk, again, and so on.

concatenated plex:
A plex whose subdisks are associated at specific offsets within the address range of the plex, and extend into the plex address range for the length of the subdisk. This layout allows regions of one or more disks to create a plex, rather than a single big region.

volboot file:
The volboot file is a special file (usually stored in /etc/vx/volboot) that is used to bootstrap the root disk group and to define a system's host ID. In addition to a host ID, the volboot file contains a list of disk access records. On system startup, this list of disks is scanned to find a disk that is a member of the rootdg disk group and that is stamped with this system's host ID. When such a disk is found, its configuration is read and is used to get a more complete list of disk access records that are used as a second-stage bootstrap of the root disk group, and to locate all other disk groups.

plex consistency:
If the plexes of a volume contain different data, then the plexes are said to be inconsistent. This is only a problem if the Volume Manager is unaware of the inconsistencies, as the volume can return differing results for consecutive reads. Plex inconsistency is a serious compromise of data integrity. This inconsistency can be caused by write operations that start around the time of a system failure, if parts of the write complete on one plex but not the other. Plexes can also be inconsistent after creation of a mirrored volume, if the plexes are not first synchronized to contain the same data. An important part of Volume Manager operation is ensuring that consistent data is returned to any application that reads a volume. This may require that plex consistency of a volume be ``recovered'' by copying data between plexes so that they have the same contents. Alternatively, the volume can be put into a state such that reads from one plex are automatically written back to the other plexes, thus making the data consistent for that volume offset.

Conventions

A number of conventions are used throughout much of the Volume Manager to provide a degree of similarity between the various operations. The following is a list of such conventions:

Utility syntax
Most utilities in the Volume Manager provide more than one operation, with operations grouped into utilities primarily by object type. Utilities that provide multiple operations are typically invoked with the following form:

	utility [ options ] keyword [ operands ] 
Here, utility is the name of the utility and keyword is a name that identifies the specific operation to perform. Any options that are introduced in the standard -letter form precede the operation keyword. This is in keeping with standard System V utility syntax, which provides for a set of options as the first arguments to a command, followed by any non-option operands. The keyword is considered an operand under standard System V syntax.

To aid in normal use, all of the utilities provide an extended usage message that lists all the options and operation keywords supported by the utility. For utilities that are keyword-based, this extended usage message can be displayed using a keyword of help. Utilities that use operands for purposes other than operation selection provide a reserved option of -H to display the extended usage information. These extended messages cannot replace the user documentation, but can serve as reminders.

Standard length numbers
Many basic properties of objects that are managed by the Volume Manager require specification of lengths, either as a pure object length or as an offset relative to some other object. The Volume Manager supports volume lengths up to 2,147,483,647 disk sectors (one terabyte on most systems). Typing such large numbers, or even much smaller numbers, can be annoying. The Volume Manager provides a uniform syntax for representing such numbers, which uses suffixes to provide convenient multipliers. Numbers can be specified in decimal, octal, or hexadecimal. Also, numbers can be specified as a sum of several numbers, as a convenience to avoid using a calculator.

A hexadecimal (base 16) number is introduced using a prefix of 0x. For example, 0xfff is the same as decimal 4091. An octal (base 8) number is introduced using a prefix of 0. For example, 0177777 is the same as decimal 65535.

A number can be followed by a suffix character to indicate a multiplier for the number. A length number with no suffix character represents a count of standard disk sectors. The length of a standard disk sector can vary between systems; it is commonly 512 bytes. On systems where disks can have different sector sizes, one of the sectors sizes will be chosen as the ``standard'' size. Supported suffix characters are:

b
multiply the length by 512 bytes (blocks)

s
multiply the length by the standard sectors size (default)

k
multiply the length by 1024 bytes (Kilobytes)

m
multiply the length by 1,048,576 (1024K) bytes (Megabytes)

g
multiply the length by 1,073,741,824 (1024M) bytes (Gigabytes)

Numbers are represented internally as an integer number of sectors. As a result, if the standard disk sectors size is larger than 512 bytes, numbers can be specified that will need to be rounded to a sector. Rounding is always done to the next lowest, not the nearest, multiple of the sector size.

Since the letter b is a valid hexadecimal character, there is a special case for the b suffix where a single blank character can separate a number from the b suffix character. Use of a blank within a number, when invoking commands from the shell, usually requires quoting the number. For example:

	vxassist make vol01 "0x1000 b" 
Numbers can be added or subtracted by separating two or more numbers by a plus or minus sign, respectively. A plus sign is optional. As an example, the largest allowed number that can be represented on a system with a 512 byte sector size can be entered as:

	1023g+1023m+1023k+1 
Note that 1024g-1 cannot be used, because the implementation cannot handle the intermediate representation of 1024g (which is greater than the largest number that can be represented) internally. However, 2g-1 can be used to represent the largest volume size that can be used with most file systems.

In output, the Volume Manager reports length numbers as a simple count of sectors, with no suffix character.

Case is not important in length specification. Hexadecimal numbers and suffix characters can be specified using any reasonable combination of upper- and lower-case letters.

Disk group selection
Most commands operate upon only one disk group per invocation. Each disk group has a separate configuration from every other disk group and it is possible for two disk groups to contain two objects that have the same name. This can happen, in particular, if a disk group is moved from one system to another. However, most utilities make no attempt to ensure that names between disk groups are unique, so name collisions can occur anyway.

System administrators who endeavor to avoid name collisions should be able to use most of the utilities without having to specify disk groups except when creating objects. Administrators cannot use single-command invocations that reference objects in more than one disk group, but disk groups will be selected automatically, based on objects specified in the command.

The standard rules that most commands use for selecting the disk group for a command are as follows:

If a set of object names is given on the command line, and if some are unique but some are not unique, then the command will still fail according to the rules listed above.

Record types

Disk group configurations contain six types of records: volume records, plex records, subdisk records, disk media records, disk group records, and disk access records. Each of these record types are described in the sections that follow. Disk access records are specific to the root disk group and are stored in configurations only because there is no other convenient place to store them; otherwise, they are logically separate from all disk groups. Since they are specific and meaningful to the local system only, the logical place for their storage is the rootdg since that is the only disk group guaranteed to exist on the system.

Disk group records
Disk group records define several different types of names for a disk group. The different types of names are:

real name
This is the name of the disk group, as defined on disk. This name is stored in the disk group configuration, and is also stored in the disk headers of all disks in the disk group.

alias name
This is the standard name that the system uses when referencing the disk group. References to the disk group name usually mean the alias name. Volume directories are structured into subdirectories based on the disk group alias name. Typically, the disk group's alias name and real name are identical. A local alias can be useful for gaining access to a disk group with a name that conflicts with other disk groups in the system, or that conflicts with records in the rootdg disk group.

disk group ID
A 64-byte identifier that represents the unique ID of the disk group. All disk groups on all systems should have a different disk group ID, even if they have the same real name. This identifier is stored in the disk headers of all disks in the disk group. It is used to ensure that the Volume Manager does not confuse two disk groups which were created with the same name.

Volume records
Volume records define the characteristics of particular volume devices. The name of a volume record defines the node name used for files in the /dev/vx/dsk and /dev/vx/rdsk directories. The block device for a particular volume (which can be used as an argument to the mount command [see mount(ADM)] has the path:

	/dev/vx/dsk/groupname/volume 
where groupname is the name assigned by the administrator to the disk group containing the volume. The raw device for a volume, typically used for application I/O and for issuing I/O control operations [see ioctl(S)], has the path:

	/dev/vx/rdsk/groupname/volume 
For convenience, volumes assigned to the root disk group are accessible under the rootdg subdirectories of /dev/vx/dsk and /dev/vx/rdsk, but are also under /dev/vx/dsk/volume and /dev/vx/rdsk/volume.

Reads to a volume device are directed to one of the read-write or read-only plexes associated with the volume. Writes to the volume are directed to all of the enabled read-write and write- only plexes associated with the volume.

During a write operation, two plexes of a volume may become out of sync with each other, due to the fact that writes directed to two disks can complete at different times. This is not normally a problem. However, if the system were to crash or lose power during a write operation, the two plexes could have different contents.

Most applications and file systems are not written with the presumption that two separate reads of a device can return different contents without an intervening write operation. Since plexes with different contents could cause such a situation where two read operations of a block return different contents, the Volume Manager expends considerable effort to ensure that this is avoided.

Volumes have the following fundamental attributes:

usage type
Each volume has a usage type, which defines a particular class of rules for operating on the volume, typically based on the expected content of the volume. Several utilities can apply extensions or limitations that apply to volumes with a particular usage type. Several usage types are included with the base release of the Volume Manager: fsgen, for use with volumes that contain file systems; gen, for use with volumes that are used as swap devices or for other applications that do not use file systems; and special root and swap usage types which are specifically for use with the root file system volume and the primary swap device.

length
Each volume has a length, which defines the limiting offset of read and write operations. The length is assigned by the administrator, and may or may not match the lengths of the associated plexes.

volume state
Each volume is either enabled, disabled, or detached. When enabled, normal read and write operations are allowed on the volume, and any file system residing on the volume can be mounted, or used in the usual way. When disabled, no access to the volume or any of its associated plexes is allowed.

usage-type state
Usage types maintain a private state field related to the volume that relate to operations that have been performed on the volume, or to failure conditions that have been encountered. This state field contains a string of up to 14 characters.

plexes
Each volume has between zero and 32 associated plexes.

read policy
A configurable policy for switching between plexes for volume reads. When a volume has more than one enabled associated plex, the Volume Manager can distribute reads between the plexes to distribute the I/O load and thus increase total possible bandwidth of reads through the volume.

The read policy can be set by the administrator. Possible policies are:
round-robin
For every other read operation, switch to a different plex from the previous read operation. Given three plexes, this will switch between each of the three plexes, in order.

preferred plex
This read policy specifies a particular named plex that is used to satisfy read requests. In the event that a read request cannot be satisfied by the preferred plex, this policy changes to round-robin.

select
This read policy is the default policy, and adjusts to use an appropriate read policy based on the set of plexes associated with the volume. If exactly one enabled read-write striped plex is associated with the volume, then that plex is chosen automatically as the preferred plex; otherwise, the round- robin policy is used. If a volume has one striped plex and one non-striped plex, preferring the striped plex often yields better throughput.

start options
This is a string that is organized as a set of usage-type options to apply when starting (enabling) a volume. See vxvol(ADM) for details.

log type
A policy to use for logging changes to the volume, which can be assigned by the administrator. Policies that can be specified are:

none
Do not perform any special actions when writing to the volume. Just write the requested data to all read-write or write-only plexes.

dirty-region-log
A volume is divided into regions. A bitmap where each bit corresponds to a region is maintained. When a write to a particular region occurs, the respective bit is set to on. When the system is restarted after a crash, this region bitmap is used to limit the amount of data copying that is required to recover plex consistency for the volume. The region changes are logged to special log subdisks associated with each of the plexes associated with the volume. Use of dirty region logging can greatly speed recovery of a volume, but it also degrades performance of the volume under normal operation.

read/write-back recover mode
This is a mode that applies to the volume, which is managed by utilities as part of plex consistency recovery. When this mode is enabled, each read operation will recover plex consistency for the region covered by the read. Plex consistency is recovered by reading data from blocks of one plex and writing that data to all other writable plexes. This ensures that a future read operation covering the same range of blocks will read the same data.

write-back-on-read-failure mode
This is a mode that applies to the volume, which can be enabled or disabled by the administrator using vxedit. If this mode is enabled, then a read failure for a plex will cause data to be read from an alternate plex and then written back to the plex that got the read failure. This will usually fix the error. Only if the writeback fails will the plex be detached for having an unrecoverable I/O failure.

writecopy mode
This is a mode that applies to the volume, which can be enabled or disabled by the administrator using vxedit. This mode takes affect only if dirty region logging is in effect. When the operating system hands off a write request to the volume driver, the operating system may continue to change the memory that is being written to disk. The Volume Manager cannot detect that the memory is changing, so it can inadvertently leave plexes with inconsistent contents. This is not normally a problem, because the operating system ensures that any such modified memory is rewritten to the volume before the volume is closed (such as by a clean system shutdown). However, if the system crashes, plexes may be inconsistent. Since the dirty region logging feature prevents recovery of the entire volume, it may not ensure that plexes are entirely consistent.

Turning on the writecopy mode (which is normally set by default) often causes the Volume Manager to copy the data for a write request to a new section of memory before writing it to disk. Because the write is done from the copied memory, it cannot change and so the data written to each plex is guaranteed to be the same if the write completes.

exception policy
There are several modes that can be set on the volume, by utilities according to the usage type of the volume. These modes affect operation of a volume in the presence of I/O failures. Currently only one of these policies, called GEN_DET_SPARSE is ever used. This policy tracks complete and incomplete plexes in a volume (an incomplete plex does not have a backing subdisk for all blocks in the volume). If an unrecoverable error occurs on an incomplete plex, the plex is detached (disabled from receiving regular volume I/O requests). If an unrecoverable error occurs on a complete plex, the plex is detached unless it is the last complete plex. If the plex is the last complete read-write plex, any incomplete plexes that overlap with the error will be detached but the plex with the error will remain attached.

This default policy is chosen to ensure that an I/O that fails on one plex will not, in the future, be directed to that plex again unless that plex is the last complete plex remaining attached to the volume. In that case, the policy ensures that the volume will return the error consistently, even in the presence of incomplete plexes.

comment
An administrator-assigned string of up to 40 characters that can be set and changed using the vxedit utility. The Volume Manager does not interpret the comment field. The comment cannot contain newline characters.

user, group, and mode
These attributes are the user, group, and file permission modes used for the volume device nodes. The user and group are normally root. The mode usually allows read and write permission to the owner, and no access by other users.

Plex records
Plex records define the characteristics of a particular plex of a volume. A plex can be in either an associated state or a dissociated state. In the dissociated state, the plex is not a part of a volume. A dissociated plex cannot be accessed in any way. An associated plex can be accessed through the volume.

Plexes have the following fundamental attributes:

plex state
Each plex is either enabled, disabled, or detached. When enabled, normal read and write operations from the volume can be directed to the plex. When disabled, no I/O operations will be applied to the plex. When detached, normal volume I/O will not be directed to the plex.

I/O failures encountered during normal volume I/O may move the enabled state for a plex directly from enabled to detached. See the description of volume exception policies (earlier in this manual page) for more information.

I/O mode
Each plex is in read-write, read-only, or write-only mode. This mode affects read and write operations directed to the volume, if the plex is enabled. For read-write and read- only modes, volume read operations can be directed to the plex. For read-write and write-only modes, volume write operations are directed to the plex.

Plexes are normally in read-write mode. Write-only mode is used to recover a plex that failed, and whose contents have thus become out-of-date with respect to the volume. It is also used when attaching a new plex to a volume. In read-write mode, writes to the volume will update the plex, causing written regions to be up- to-date. Typically, a set of special copy operations will be used to update the remainder of the plex.

layout
The organization of associated subdisks with respect to the plex address space. The layout is striped, concatenated, or RAID-5.

subdisks
Each plex has zero or more associated subdisks. Subdisks are associated at offsets relative to the beginning of the plex address space. Subdisks for concatenated plexes may not cover the entire length of the plex, in which case they leave holes in the plex. A plex that is not as long as the volume to which it is associated is considered to have a hole extending from the end of the plex to the end of the volume. A plex with a hole is considered incomplete, and is sometimes called sparse.

log subdisk
Each plex can have at most one associated log subdisk. A log subdisk is used with the dirty region logging feature to improve the time required to recover consistency of a volume after a system failure.

length
The length of a plex is the offset of the last subdisk in the plex plus the length of that subdisk. In other words, the length of the plex is defined by the last block in the plex address space that is backed by a subdisk. This value may or may not relate to the length of the volume, depending on whether the plex is completely contiguously allocated.

contiguous length
The offset of the first block in the plex address space that is not backed by a subdisk. If the plex has no holes, the contiguous length matches the plex length. If the contiguous length is equal to or greater than the length of the associated volume, the plex is considered complete, otherwise it is sparse.

usage-type state
Volume usage types maintain a private state field related to the the operations that have been performed on the plex, or to failure conditions that have been encountered. This state field contains a string of up to 14 characters.

condition flags
Various condition flags are defined for the plex that define state which is recognized automatically, rather than managed by the volume usage type. Defined flags are:

NODAREC
No physical disk could be found corresponding to the disk ID in the disk media record for one of the subdisks associated with the plex. The plex cannot be used until the condition is fixed or the affected subdisk is dissociated.

REMOVED
One of the disk media records was put into the removed state through explicit administrative action. The plex cannot be used until the disk is replaced or the affected subdisk is dissociated.

RECOVER
A disk for one of the disk media records was replaced or was reattached too late to prevent the plex from becoming out-of-date with respect to the volume. The plex requires complete recovery from another plex in the volume to synchronize the plex with the correct contents of the volume.

IOFAIL
The plex was detached as a result of an I/O failure detected during normal volume I/O. The plex is out-of-date with respect to the volume, and in need of complete recovery. However, this condition also indicates a likelihood that one of the disks in the system should be replaced.

volatile state
A plex is considered to have ``volatile'' contents if the disk for any of the plex's subdisks is considered to be volatile. The contents of a volatile disk are not presumed to survive a system reboot. The contents of a volatile plex are always considered out-of-date after a recovery and in need of complete recovery from another plex.

comment
An administrator-assigned string of up to 40 characters that can be set and changed using the vxedit utility. The Volume Manager does not interpret the comment field. The comment cannot contain newline characters.

Subdisk records
Subdisk records define a region of disk, allocated from a disk's public region. Subdisks have very little state associated with them, other than the configuration state that defines which region of disk the subdisk occupies. Subdisks cannot overlap each other, either in their associations with plexes, or in their arrangement on disk public regions.

Subdisks have the following fundamental attributes:

disk media name
The name of the disk media record that the subdisk is defined on.

disk offset
The offset, from the beginning of the disk's public region, to the start of the subdisk.

plex offset
For associated subdisks, this is the offset (from the beginning of the plex) of the subdisk association. For subdisks associated with striped plexes, the plex offset defines relative ordering of subdisks in the plex, rather than actual offsets within the plex address space.

length
The length of the subdisk.

comment
An administrator-assigned string of up to 40 characters that can be set and changed using the vxedit utility. The Volume Manager does not interpret the comment field. The comment cannot contain newline characters.

Disk media records
Disk media records define a specific disk within a disk group. The name of a disk media record (the disk media name) is assigned when a disk is first added to a disk group (using the vxdg adddisk operation). Disk media records can be assigned to specific physical disks by associating the disk media record with the current disk access record for the physical disk.

Disk media records have the following fundamental attributes:

disk ID
A 64-byte unique identifier representing the physical disk to which the media record is associated. This can be cleared to indicate that the disk is considered in the removed state. A removed disk has no current association with any physical disk.

disk access name
The disk access name that is currently used to access the physical disk referenced by the disk ID. If the disk ID is defined, but no physical disk with that ID could be found, the disk access name will be clear. A disk where the physical disk could not be found is considered to be in the NODAREC, or inaccessible, state. A disk can become inaccessible either because the indicated disk is not currently attached to the system, or because I/O failures on the physical disk prevented the Volume Manager from identifying or using the physical disk.

A disk media record that has an active association with a physical disk (both the disk ID and the disk access name attributes are defined), inherits several properties from the underlying physical disk. These attributes are taken from the disk header, which is stored in the private region of the the disk. These inherited attributes are:

public length
The length of the region of the physical disk that is available for subdisk allocations.

private length
The length of the region of the physical disk that is reserved for storing private Volume Manager information.

atomic I/O size
This is the fundamental I/O size for the disk, in bytes, also known as the sector size. All I/ Os destined for this disk must be multiples of this size. Currently, the Volume Manager requires that all disks have the same sector size. On most systems, this size is 512 bytes.

Disk access records
Disk access records define an address, or access path, that can be used to access a disk. The list of all disk access records defines the list of all disk addresses that the Volume Manager can use to locate physical disks. Disk access records do not define specific physical disks, since physical disks can be moved on a system. When a physical disk is moved, a different disk access record may be necessary to locate it.

Disk access records are stored in the rootdg disk group configuration. Unlike all other record types, the names of disk access records can conflict with the names of other records. For example, a specialty disk (such as a RAM disk) can use the same name for both the disk access record and the disk media record that points to it. It is typically advisable to use different names for the access and media records, to avoid additional confusion if disks are moved.

Disk access records can be defined explicitly. Some (sometimes all) disk access records may be configured automatically by the Volume Manager, based on available information in the operating system. Such automatically-configured disks are not stored persistently in the on-disk root disk group configuration, but are instead regenerated every time the Volume Manager starts up.

Disk access records have the following fundamental attributes:

disk access name
The name of the disk access record is typically a disk address of some kind. On Sun systems, disk access names are usually of the form c#b#t#d#s0, indicating use of the entire disk on controller c#, with Bus ID b#, SCSI target ID t#, and logical unit d#. The s0 suffix is used as a convention indicating the use of standard partitioning. Other systems are likely to have different conventions for the disk access name.

type
Each disk access record has a type, which identifies certain key characteristics of the Volume Manager's interaction with the disk. Currently available types are: sliced, simple, and nopriv. See vxdisk(ADM) for more information on disk types. Typically, most or all of the disks will be of type sliced. It may be desirable to create specialty disks (such as RAM disks) with type nopriv.

If the physical disk represented by the disk access record is currently associated with a disk media record, then the following fields are defined:

disk group name
The name of the disk group containing the disk media record.

disk media name
The name of the disk media record that points to the physical disk.

Additional attributes can be added, arbitrarily, by disk types. See vxdisk for a list of additional attributes defined by the standard disk types.

Volume usage types

The usage type of a volume represents a class of rules for operating on a volume. Each usage type is defined by a set of executables under the directory /etc/vx/type/usage_type, where usage_type is the name given to the usage type. The required executables are: vxinfo, vxmake, vxmend, vxplex, vxsd, and vxvol. These executables are invoked by the Volume Manager administrative utilities with the same names. The executables under /etc/vx/type should not, normally, be executed directly.

Five usage types are provided with the Volume Manager: gen, fsgen, root, swap, and raid5. It is likely that new usage types will be added in future releases. It is also possible for third- party products to install additional usage types.

The usage types currently provided with the Volume Manager store state information in the volume and plex usage-type state fields. The state fields defined for volumes are:

EMPTY
The volume is not yet initialized. This is the initial state for volumes created by vxmake.

CLEAN
The volume has been stopped and the contents for all plexes are consistent.

ACTIVE
The volume has been started and is running normally, or was running normally when the system was stopped. If the system crashes in this state, then the volume may require plex consistency recovery.

NEEDSYNC
The volume requires recovery. This is typically set after a system failure to indicate that the plexes in the volume may be inconsistent, so that they require recovery [see the resync operation in vxvol(ADM)].

SYNC
Plex consistency recovery is currently being done on the volume. vxvol resync sets this state when it starts to recovery plex consistency on a volume that was in the NEEDSYNC state.

The state fields defined for plexes are:

EMPTY
The plex is not yet initialized. This state is set when the volume state is also EMPTY.

CLEAN
The plex was running normally when the volume was stopped. The plex will be enabled without requiring recovery when the volume is started.

ACTIVE
The plex is running normally on a started volume. The plex condition flags (NODAREC, REMOVED, RECOVER, and IOFAIL) may apply if the system is rebooted and the volume restarted.

STALE
The plex was detached, either by vxplex det or by an I/O failure. vxvol start will change the state for a plex to STALE if any of the plex condition flags are set. STALE plexes will be reattached automatically, when starting a volume, by calling vxplex att.

OFFLINE
The plex was disabled by the vxmend off operation. See vxmend(ADM) for more information.

SNAPATT
This is a snapshot plex that is being attached by the vxassist snapstart operation. When the attach is complete, the state for the plex will be changed to SNAPDONE. If the system fails before the attach completes, the plex and all of its subdisks will be removed.

SNAPDONE
This is a snapshot plex created by vxassist snapstart that is fully attached. A plex in this state can be turned into a snapshot volume with vxassist snapshot. See vxassist(ADM) for more information. If the system fails before the attach completes, the plex and all of its subdisks will be removed.

SNAPTMP
This is a snapshot plex being attached by the vxplex snapstart operation. When the attach is complete, the state for the plex will be changed to SNAPDIS. If the system fails before the attach completes, the plex will be dissociated from the volume.

SNAPDIS
This is a snapshot plex created by vxplex snapstart that is fully attached. A plex in this state can be turned into a snapshot volume with vxplex snapshot. See vxplex(ADM) for more information. If the system fails before the attach completes, the plex will be dissociated from the volume.

TEMP
This is a plex that is being associated and attached to a volume with vxplex att. If the system fails before the attach completes the plex will be dissociated from the volume.

TEMPRM
This is a plex that is being associated and attached to a volume with vxplex att. If the system fails before the attach completes the plex will be dissociated from the volume and removed. Any subdisks in the plex will be kept.

TEMPRMSD
This is a plex that is being associated and attached to a volume with vxplex att. If the system fails before the attach completes, the plex and its subdisks will be dissociated from the volume and removed.

Exit codes

The majority of the Volume Manager utilities use a common set of exit codes, which can be used by shell scripts or other types of programs to react to specific problems detected by the utilities. For C programmers, these exit status codes are defined in the include file volclient.h. The number and macro name for each distinct exit code is described below. Shell script writers must directly compare against the numbers specified.

(0) VEX_OK
The utility is not reporting any error through the exit code.

(C) VEX_USAGE
Some command line arguments to the utility were invalid.

(S) VEX_SYNTAX
A syntax error occurred in a command or description, or a specified record name is too long or contains invalid characters. This code is returned only by utilities that implement a command or description language. This code may also be returned for errors in search patterns.

(S) VEX_NOVOLD
The volume daemon does not appear to be running.

(F) VEX_IPC
An unexpected error was encountered while communicating with the volume daemon.

(M) VEX_OSERR
An unexpected error was returned by a system call or by the C library. This can also indicate that the utility ran out of memory.

(6) VEX_LOST
The status for a commit was lost because the volume daemon was killed and restarted during the commit of a transaction, but after restart the volume daemon did not know whether the commit succeeded or failed.

(HW) VEX_UTILERR
The utility encountered an error that it should not have encountered. This generally implies a condition that the utility should have tested for but did not, or a condition that results from the volume daemon returning a value that did not make sense.

(ADM) VEX_TIMEOUT
The time required to complete a transaction exceeded 60 seconds, causing the transaction locks to be lost. As most utilities will reattempt the transaction at least once if a timeout occurs, this usually implies that a transaction timed out two or more times.

(9) VEX_NODG
No disk group could be identified for an operation. This results either from naming a disk group that does not exist, or from supplying names on a command line that are in different disk groups or in multiple disk groups.

(10) VEX_CHANGED
A change made to the database by another process caused the utility to stop. This code is also returned by a usage-type-dependent utility if it is given a record that is associated with a different usage type. If this situation occurs when the usage- type-dependent utility is called from a switchout utility, then the database was changed after the switchout utility determined the proper usage type to invoke.

(11) VEX_NOENT
A requested subdisk, plex, or volume record was not found in the configuration database. This may also mean that a record was an inappropriate type.

(12) VEX_EXIST
A name used to create a new configuration record matches the name of an existing record.

(13) VEX_BUSY
A subdisk, plex, or volume is locked against concurrent access. This code is used for inter- transaction locks associated with usage type utilities. The code is also used for the dissociated plex or subdisk lock convention, which writes a non-blank string to the tutil[0] field in a plex or subdisk structure to indicate that the record is being used.

(14) VEX_NOUSETYPE
No usage type could be determined for a utility that requires a usage type.

(15) VEX_BADUSETYPE
An unknown or invalid usage type was specified.

(16) VEX_ASSOC
A plex or subdisk is associated, but the operation requires a dissociated record.

(17) VEX_DISASSOC
A plex or subdisk is dissociated, but the operation requires an associated record. This code can also be used to indicate that a subdisk or plex is not associated with a specific plex or volume.

(18) VEX_LAST
A plex or subdisk was not dissociated because it was the last record associated with a volume or plex.

(19) VEX_TOOMANY
Association of a plex or subdisk would surpass the maximum number that can be associated to a volume or plex.

(20) VEX_INVAL
A specified operation is invalid within the parameters specified. For example, this code is returned when an attempt is made to split a subdisk on a striped plex, or to use a split size that is greater than the size of the plex.

(21) VEX_IOERR
An I/O error was encountered that caused the utility to abort an operation.

(22) VEX_NOPLEX
A volume involved in an operation did not have any associated plexes, although at least one was required.

(23) VEX_NOSUBDISK
A plex involved in an operation did not have any associated subdisks, although at least one was required.

(24) VEX_UNSTARTABLE
A volume could not be started by the vxvol start operation, because the configuration of the volume and its plexes prevented the operation.

(25) VEX_STARTED
A specified volume was already started.

(26) VEX_UNSTARTED
A specified volume was not started. For example, this code is returned by the vxvol stop operation if the operation is given a volume that is not started.

(27) VEX_DETACHED
A volume or plex involved in an operation is in the detached state, thus preventing a successful operation.

(28) VEX_DISABLED
A volume or plex involved in an operation is in the disabled state, thus preventing a successful operation.

(29) VEX_ENABLED
A volume or plex involved in an operation is in the enabled state, thus preventing a successful operation.

(30) VEX_UNKNOWN
An unknown error was encountered. This code may be used, for example, when the volume daemon returns an unrecognized error number.

(31) VEX_OPEN
An operation failed because a volume device was open or mounted, or because a subdisk was associated with an open or mounted volume or plex.

Exit codes greater than 32 are reserved for use by usage types. Codes greater than 64 can be reserved for use by specific utilities.

References

vxassist(ADM), vxbootsetup(ADM), vxconfigd(ADM), vxdctl(ADM), vxdg(ADM), vxdisk(ADM), vxdiskadd(ADM), vxdiskadm(ADM), vxdisksetup(ADM), vxedit(ADM), vxencap(ADM), vxevac(ADM), vxinfo(ADM), vxintro(ADM), vxiod(ADM), vxmake(ADM), vxmend(ADM), vxmirror(ADM), vxnotify(ADM), vxplex(ADM), vxprint(ADM), vxreattach(ADM), vxrecover(ADM), vxrelocd(ADM), vxresize(ADM), vxrootmir(ADM), vxsd(ADM), vxserial(ADM), vxsparecheck(ADM), vxstat(ADM), vxtrace(ADM), vxunroot(ADM), vxvol(ADM), plexrec(F), sdrec(F), vol_pattern(F), volrec(F), vxmake(F), vxconfig(HW), vxinfo(HW), vxio(HW), vxiod(HW), vxtrace(HW)



Copyright © 2005 The SCO Group, Inc. All rights reserved.